Cisco Systems Media Gateway Controller Node Manager Installing on the Presentation Server, Enter

Page 22

Chapter 2 Installing Cisco MNM

Performing a New Installation of Cisco MNM

Note To use an existing FlexLM daemon running on your system, enter n and press Enter.

Step 12 Press Enter if you have a valid license file available on your network. If you do not have a valid license file, enter n.

Note To obtain a license, see “Task 6: Obtain a Cisco EMF License” section on page 2-6.

Note If you do not have a valid license file, you can still continue with the installation. The installation process continues, but you cannot start the Cisco EMF Server until a valid license key is provided and the <CEMF_ROOT>/bin/cemf license command is run to update the license information.

Step 13 Enter the full name, including the path, of the license file and press Enter.

The installation process begins and takes several minutes. When the installation is complete, a message indicates that the Cisco EMF Server Package installation completed satisfactorily.

This completes the Cisco EMF installation procedure on the management server.

If you are using a distributed configuration (with the management server and the presentation server), continue installing Cisco EMF on the presentation server by following the steps in the “Installing on the Management Server” section on page 2-9. Otherwise, continue the installation by performing the procedure described in the “Installing Cisco EMF Service Packs” section on page 2-11.

Installing on the Presentation Server

 

 

 

Note

Cisco EMF must be installed on the Management server first, and the Cisco EMF server must be started

 

 

 

 

before a Presentation client is installed.

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 1

Log in as the root user on the Presentation Server where the Cisco EMF client is to be installed.

 

 

 

Step 2

Insert the Cisco EMF 3.2 Service Pack 7, CD #1 in the CD-ROM drive.

 

 

 

Step 3

Change the folder using the following command:

 

 

 

 

# cd /cdrom/cdrom0

 

 

 

Step 4

Invoke the Cisco EMF installation script using the following command:

 

 

 

 

# ./cemfinstall

 

 

 

 

A menu listing the Cisco EMF installation options displays.

 

 

 

Step 5

Select the Cisco Element Manager Framework - Client option, and press Enter.

 

 

 

Step 6

Accept the default location for installation, /opt/cemf and press Enter.

 

 

 

Step 7

Specify the hostname of the management system where the Cisco EMF Server is installed, and then press

 

 

 

 

Enter.

 

 

 

Step 8

Press Enter to confirm the hostname for the management server.

 

 

 

Cisco Media Gateway Controller Node Manager Installation Guide

 

 

 

 

 

 

 

 

 

 

2-10

 

 

OL-18332-01

 

 

 

 

 

Image 22
Contents Americas Headquarters Text Part Number OL-18332-01Page N T E N T S Upgrading from Previous Cisco MNM Releases Audience Document ObjectivesRelated Documentation Release Number Document Number Change Date Change Summary Document Change HistoryOL-18332-01 December Initial release Who Should Install Cisco MNM? Installation OverviewA P T E R Server Software Determine Your Hardware RequirementsClient Software Supported Configurations Distributed ConfigurationDisk Drives and Database Storage Number, Network Size Cisco PGW 2200 SoftswitchHardware Requirements Operators, 11-20 PairsBefore You Begin Installation ChecklistInstall them now Information in the release notesOL-14272-02 Installation Software Performing a New Installation of Cisco MNMCisco MNM and Cisco Vspt Software Terminal Software Solaris Operating SystemIfconfig -a Information Where To Find It ValueRequired Information Task 2 Ensure That Network Devices Have the Correct Software Task 3 Plan and Execute Hard Drive PartitioningMedium to Large-Sized Deployments2 Task 5 Make System Configuration ModificationsCisco PGW 2200 Softswitch OS recommended patches ManufacturerTask 6 Obtain a Cisco EMF License Setting Up IP and Remote User Access FilesDNS Configurations File Modification6509 devices through a CiscoView server Use these steps to install CiscoViewOn the Cisco MNM workstation or on a remote server Press Enter to read the license agreement Run the installation setup script by enteringInstallation Client patchesInstalling on the Management Server Task 8 Install Cisco EMFMenu listing the Cisco EMF installation options displays Before a Presentation client is installed Installing on the Presentation ServerEnter Installing Cisco EMF Service Packs Choose the package to installDownloading Cisco EMF Patches Installing the Cisco EMF SSH Add-On PackageTo download a Cisco EMF patch, use the following steps Starting Cisco EMF Installing Cisco MNM Etc/init.d/volmgt startVerifying the Cisco MNM Installation Cmnminstall -uVerifying the Installation of CiscoView About Help Enter your login name and passwordStarting Cisco MNM Changing the IP Address of the CiscoView Server If NeededDeploying New SSH-Enabled Elements Updating Existing SSH-Enabled Network ElementsGetting Started with Secure Communications on Cisco MNM Install the package using the following command Task 10 Install the CiscoView Security ModuleIdentifying SSH-Enabled Elements Change the user to rootFor Broadcast method Creating an Xdmcp ConnectionCreating a Workstation Connection For Direct methodUpgrading from Previous Cisco MNM Releases Task 13 Configure Network Devices to Forward AlarmsFixing Insufficient Color Problems Task 12. Synchronize Time# ./cmnminstall -u # ./cmnminstall -upgrade Choose Deployment Delete Objects Uninstalling Cisco MNMBacking Up Your Databases Click Finish in the prompt# ./cmnminstall -s Displaying Current Cisco MNM Release PackagesRemove the Cisco EMF using the following command Viewing Help for Cisco MNM Install ScriptsUninstalling Cisco EMF All current Cisco MNM release packages displayCisco EMF is uninstalled Troubleshooting Common Installation ProblemsRelated Topics Mounting a DVD-ROM Drive from a Remote System Problem Suggested StepsUnmouting a DVD-ROM Drive From a Remote System License is a multi-user license If needed, update the IP address in Cisco EMFWhen prompted, enter the new host name Restart Cisco EMF Another but must get a new license for your current machineClear the cache files by deleting the files in /tmp/ostore Setting by a factor of fourStop Cisco EMF Restart Cisco EMFOscommsegreservedsize D E IN-2 Time Greenwich Mean Time IN-4