Cisco Systems Media Gateway Controller Node Manager # ./cmnminstall -u # ./cmnminstall -upgrade

Chapter 2 Installing Cisco MNM

Upgrading from Previous Cisco MNM Releases

Step 1 Read the “Installation Checklist” section on page 1-5to identify other tasks needed for the upgrade. Step 2 Have Cisco EMF and Cisco MNM running.

Step 3 Change the working directory using the following command:

%cd <CEMF_ROOT>/bin

Step 4 Verify that Cisco EMF is running using the following command

%./cemf query

Text similar to the following is displayed:

CEMF Manager 3.2 initialized

Step 5 Change to the root user using the following command:

#su - root

Step 6 Verify that the Volume Management daemon is running using the following command:

#ps -ef grep vold

Text similar to the following is displayed:

root 483 1 0 Oct 23 ? 0:00 /usr/sbin/vold -f /etc/vold.conf

Note If the daemon is not running, start the daemon using the following command:

/etc/init.d/volmgt start

Verify that the Volume Management daemon is running with the command provided above. If it is still not running, contact your system administrator.

Step 7 Insert the Cisco MNM 2.8(1) CD in the CD-ROM drive:

Step 8 Change the working folder using the following command:

#cd /cdrom/cscocmnm

Step 9 Back up your database (see the “Backing Up Your Databases” section on page 2-23).Step 10 Start Cisco MNM.

Step 11 Close Cisco MNM.

Step 12 Eject the Cisco MNM 2.8(1) CD.

Step 13 Insert the Cisco EMF 3.2 Service Pack 7, CD #2 in the CD-ROM drive.

Step 14 Install the CEMF 3.2 Service Packs 7, 7.1, and 7.2.

Step 15 Enter either the following commands:

#./cmnminstall -u

or

#./cmnminstall -upgrade

Step 16 Enter the required information as summarized here:

•Logfile directory location—Press Enter to accept the default location /var/tmp, or enter another location and press Enter.

•Logfile name—Press Enter to accept the default name CSCOcmnm.log, or enter another name and press Enter.

	Cisco Media Gateway Controller Node Manager Installation Guide
2-22	OL-18332-01