Cisco Systems 6500 manual Feature Description

Chapter 2 Ethernet Switching Modules

10/100 and 10/100/1000 Ethernet Modules

Table 2-21 WS-X6148X2-RJ-45 and WS-X6148X2-45AF Ethernet Modules Features (continued)

Feature	Description
Chassis/slot restrictions	No chassis or slot restrictions; the module can occupy any slot in any
	Catalyst 6500 or Catalyst 6500-E chassis.
Bus connection	Single connection into the 32-Gbps shared bus (both modules)
Module upgrades available
PoE support	• WS-X6148X2-RJ-45—Field upgradeable to both Cisco
	prestandard and IEEE 802.3af with the WS-F6K-FE48X2-AF=
	PoE daughter card.
	Note With the IEEE 802.3af PoE daughter card installed, the
	WS-X6148X2-RJ-45 module can support up to 48 Class 3
	(15.4 W) devices per module when operating as a 48-port
	module or up to 96 Class 2 (7 W) devices per module when
	operating as a 96-port module.
	See the Cisco Catalyst 6500 Series Power over Ethernet Daughter
	Cards Field-Upgrade Installation Note for field upgrade procedures.
	See Appendix A for further information on the PoE daughter cards.
Distributed forwarding	Not supported.
support
Pluggable transceivers	Not supported.
support

Catalyst 6500 Series Ethernet Modules Installation Guide

2-34 OL-6265-04