Cisco Systems manual See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL

Chapter 2 Ethernet Switching Modules

10 and 10/100 Fiber-Based Ethernet Modules

Table 2-7	WS-X6524-100FX-MM Features (continued)
Feature		Description
Queues per port		•	Tx—1p3q1t
		•	Rx—1p1q0t
Chassis/slot restrictions		No chassis or slot restrictions; the module can occupy any slot in any
		Catalyst 6500 or Catalyst 6500-E chassis.
Bus connection		Single connection into the 32-Gbps shared bus
Module upgrades available
PoE support		Not available
Distributed forwarding		Field upgradeable to support distributed forwarding with the following
support		daughter cards:
		•	WS-F6K-DFC
		• WS-F6K-DFC3A
		•	WS-F6K-DFC3B
		• WS-F6K-DFC3BXL
		See Appendix A for further information on the DFC daughter cards.
		See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL
		Installation Note for field installation procedures.
Pluggable transceivers		Not supported
support
Digital Optical Monitoring		Not supported
(DOM) support
Module front panel LEDs		STATUS
		• Green—All diagnostics pass; the module is operational.
		• Orange—The module is booting or running diagnostics; an
			overtemperature condition has occurred.
		LINK
		• Green—The port is active (the link is connected and operational).
		• Flashing orange—The port failed diagnostics and is disabled.
		• Orange—The port is disabled.
		• Red—The module is resetting; an overtemperature condition has
			occurred.
		Note If the module fails to download code and configuration
			information successfully during the initial reset, the LED stays
			red; the module does not come online.
		• Off—The port is not active or the link is not connected.

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-04 2-11