Chapter 2 Ethernet Switching Modules
10/100 and 10/100/1000 Ethernet Modules
Table
Feature | Description | |
Queues per port | • | |
| • | |
|
| |
Chassis/slot restrictions | No chassis or slot restrictions; the module can occupy any slot in any | |
| Catalyst 6500 or Catalyst | |
|
| |
Bus connection | ||
|
|
|
Module upgrades available |
|
|
PoE support | Not available. | |
Distributed forwarding | Can be | |
support | ||
| See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL | |
| Installation Note for additional information and field upgrade | |
| procedures. | |
| See Appendix A for additional information on the DFC daughter cards. | |
|
| |
Pluggable transceivers | Not supported. | |
support |
|
|
|
| |
TDR support | Not supported. | |
|
| |
Module front panel LEDs | STATUS | |
| • | |
| • | |
|
| An overtemperature condition has occurred. (A minor temperature |
|
| threshold has been exceeded during environmental monitoring.) |
| • | |
|
| on or the module has been hot inserted during the normal |
|
| initialization sequence. |
|
| An overtemperature condition has occurred. (A major temperature |
|
| threshold has been exceeded during environmental monitoring.) |
|
| If the module fails to download code and configuration information |
|
| successfully during the initial reset, the LED stays red; the module |
|
| does not come online. |
| LINK | |
| • | |
| • | |
|
| or the module is initializing1. |
| • Flashing | |
| • | |
| PHONE |
•
•
1.Verify that all LINK LEDs are functioning.
Catalyst 6500 Series Ethernet Modules Installation Guide
|
| ||
|
|