Cisco Systems 6500 manual Feature Description

Chapter 1 Catalyst 6500 Series Switch Chassis Overview

Catalyst 6513-E Switch

Table 1-23	Catalyst 6513-E Switch Features (continued)
Feature		Description
Supervisor engines		• Supports Supervisor Engine 32, Supervisor Engine 720, Supervisor
		Engine 720-10GE, and Supervisor Engine 2T.
		– Supervisor Engine 32, Supervisor Engine 720, and Supervisor
		Engine 720-10GE are installed in slot 7 and slot 8.
		– Supervisor Engine 720, Supervisor Engine 720-10GE, and
		Supervisor Engine 2T have built-in switching fabric; Switch Fabric
		Modules (WS-C6500-SFM and WS-X6500-SFM2) are not
		supported.
		– Supervisor Engine 32 does not support the Switch Fabric Modules
		((WS-C6500-SFM and WS-X6500-SFM2).
		• The uplink ports are fully functional on all redundant supervisor engine
		models when they are in standby mode.
		Note In systems with redundant supervisor engines, both supervisor
		engines must be the same model and have the same daughter card
		configurations. Each supervisor engine must have the resources to
		run the switch on its own, which means all supervisor engine
		resources are duplicated. Identical supervisor engine memory
		configurations are recommended, but are not required as long as the
		supervisor engine with the smaller memory configuration is
		sufficient to run the configured features of the switch. Additionally,
		each supervisor engine must have its own flash device and console
		port connections.

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-04 1-51