Cisco Systems 3200 Series manual Label

Chapter 3 Replacing Cards in the Cisco ISR 3270 Rugged Enclosure

Card Replacement Process

Applying New I/O End Cap Function Labels

To apply new I/O end cap function labels, follow these steps:

Step 1 Identify the labels on the I/O end cap you want to change.

Step 2 Peel off the new labels from the label set you received from Cisco.

Step 3 Place the new labels over the old labels, as show in Figure 3-17. (Figure 3-17shows one new label being applied over an old label.)

Figure 3-17 Attaching I/O Function Labels

1

270480

1

Label

	Cisco 3200 Series Router Hardware Upgrade Guide
OL-15983-01		3-17