Cisco Systems 3200 Series manual Antenna End Cap Bolts

Chapter 2 Replacing Cards in the Cisco 3230 ISR Rugged Enclosure

Card Replacement Process

Disconnecting All Cables from the Enclosure

Warning Before you start working on rugged enclosures, disconnect all cables, including power, to avoid damage to the unit.

Removing the Antenna End Cap

Warning Class 1 laser product. Statement 1008

To remove the antenna end cap of a Cisco 3230 Rugged Enclosure, follow these steps:

Caution Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.

Step 1 Using a 3/8-inch socket wrench to loosen the four 1/4-20 bolts on the end cap. Figure 2-1shows these bolts.

Figure 2-1 Antenna End Cap Bolts

270453

Cisco 3200 Series Router Hardware Upgrade Guide

2-2 OL-15983-01