About This Guide
This guide describes how to perform basic maintenance of your Cisco 3230 Rugged Integrated Services Router (ISR) or Cisco 3230 Rugged ISR. The basic maintenance described in this guide includes replacing old or faulty cards and adding Wireless Mobile Interface Cards (WMICs). Basic maintenance also includes replacing the small
The following chapters provide information that you need for performing basic maintenance of your Cisco 3200 series ISR:
•Chapter 1, “Introduction,” describes the enclosures that house the Cisco 3200 series ISRs.
•Chapter 2, “Replacing Cards in the Cisco 3230 ISR Rugged Enclosure,” describes how to replace or add new cards to the card stack of the Cisco 3230 Rugged ISR.
•Chapter 3, “Replacing Cards in the Cisco ISR 3270 Rugged Enclosure,” describes how to replace or add new cards to the card stack of the Cisco 3270 Rugged ISR.
•Chapter 4, “Replacing the SFP Module,” describes how to install and remove SFP modules on the Cisco 3270 Rugged Router card.
Audience and Scope
The audience for this document is the system administrator (SA), the system integrator (SI), and the system engineer (SE). They are experts with networking industry training and experience. We assume that users are familiar with the terminology and concepts of the
The SA, SI, or SE uses this document to understand how to connect the router to peripheral devices and how to perform minor troubleshooting on the cards in an existing router. Although users might not be specifically identified as SAs, SIs, or SEs, all users of this documentation are assumed to have comparable skills and knowledge.
Related Documentation
You can access these documents on the Documentation page Cisco.com at www.cisco.com. The following documentation is available at the http://www.cisco.com/en/US/products/hw/routers/ps272/tsd_products_support_series_home.html:
•Cisco 3200 Series Router Hardware Reference
Cisco 3200 Series Router Hardware Upgrade Guide
| v | |
|