Remote Cisco 765 Command Summary
Remote Cisco 765 Command Summary
Following is the command summary to configure the remote Cisco 765 series router for IP static routing with CHAP and MLP:
set switch 5ess
set 1 dir directory_number set 2 dir directory_number set system 765
set multidestination on set ppp multilink on
set ppp authentication incoming chap set ppp authentication outgoing chap cd lan
set ip address 192.168.147.9 set ip netmask 255.255.255.248 set ip routing on
set ip rip update periodic set user 4500
set ppp secret client
set ip address 172.16.125.7 set ip netmask 255.255.255.0 set ip routing on
set ip framing none
set ip route destination 0.0.0.0 gateway 172.16.125.1 propagate on set number 5558011
set bridging off
set ip rip update off set ppp secret host set timeout 360
demand 2 threshold 32 duration 5 set active
reboot
Note The set ppp authentication outgoing chap command in this example is not recommended when connecting to Ascend 4000 or NAS routers.
For detailed information regarding the commands listed here, refer to the Cisco 700 Series Router Command Reference.
Using CHAP