Cisco Systems 700 manual IPX Static Routing with Chap and MLP, 4500

Page 52

IPX Static Routing with CHAP and MLP

IPX Static Routing with CHAP and MLP

This section describes how to configure the remote Cisco 765 series router and the central site Cisco 4500 series router for Internetwork Packet Exchange (IPX) static routing with Point-to-Point Protocol (PPP).

Figure 4-6 is an illustration of the configuration used in this example.

Figure 4-6 IPX Static Routing with PPP

Ethernet interface					Ethernet interface
IPX network: 1478					IPX network: 23160
			Serial interface		Serial interface
			IPX network: 32125		IPX network: 32125
			765	ISDN network	4500
		Remote router			Central site router
		Remote router			Central site router
		IPX address:			IPX address:
		32125: 0040f9cfd5			32125: 0c08af65
		ISDN number: 5553693/4			ISDN number: 5558011/2
		User profile name: 4500			Host name: 4500

S4771

IPX file server IPX internal address: 3039e670

4-12Cisco700 Series Router Configuration Guide

Image 52

Contents Cisco 700 Series Router Configuration Guide Page N T E N T S Chapter Using Chap Chapter Configuring Dhcp Relay, Dhcp Server, and PAT Token Caching A-2 About This Manual Related Documentation Conventions Set systemname systemname Overview Supported ProtocolsSoftware Images Administrative Configuration Options 4Cisco700 Series Router Command Reference Using Profiles with Cisco 700 Series Routers Profile OverviewSystem and Profile Parameters Profiles and ConnectionsSystem Mode Parameter Set Profile Mode Parameter SetLists the parameters that can be configured in a profile Permanent ProfilesDisplaying Profile Configurations Creating and Modifying ProfilesRemoving Profile-Based Values Host set user tomdHostProfile reset user tomd Incoming CallsDeleting Profiles Changing Profile NamesOutgoing Calls 8Cisco700 Series Router Configuration Guide Basic Configurations Basic Configuration ConceptsProfiles Bridges and RoutersLANs and WANs Current Configuration Show configHost show config Remote and Central SitesPassword and Secret Starting PointAdditional Reference Set defSetting Spid Autodetection North America only Set autodetection onSetting SPIDs Manually North America only Set switch dmsBridging with a Cisco 700 Series Router Bridging ExampleRouting IP with a Cisco 700 Series Router to an ISP Cisco 700 Series Router Bridging InstructionsConnecting to an ISP-Example Configuration Routing IP to a Central Site Routing a Cisco 700 Series Router to an ISP InstructionsSet system 764 cd lan Set ip address Set user isp Set numberRouting IP to a Central Site-Example Configuration Central Site IP Routing Command Summary Set system remote765 set multidestination on cd LANRouting IP and IPX On-Demand Set ppp auth in chap set ppp secret host cd lanRouting IP and IPX On-Demand-Example Configuration On-Demand IP and IPX Routing with PPP Instructions Cd LANCentral Site On-Demand IP and IPX Routing with PPP Commands Set bridging off18Cisco 700 Series Router Configuration Guide Using Chap IP Static Routing and Callback with Chap Authentication Spid Detection North America onlyRemote Cisco 765 Command Summary Set switch 5essSet ip rip update off set timeout Set ip rip version 2 set userIP Static Routing with Chap Authentication and MLP Set ip rip update periodic set user Set ppp secret client Demand 2 threshold 32 duration 5 set active RebootIP Static Routing with PAP Authentication and MLP IP Static Routing with PAP AuthenticationSet bridging off set timeout 360 set active reboot IP Unnumbered Routing and Chap Authentication with MLP IP Unnumbered Static Routing and Chap with MLP Set ppp secret host cd lan IP Static and IPX Static Routing with Chap and MLP IP Static and IPX Static Routing with PPPSet ip rip update periodic set user Set multidestination onIPX Static Routing with Chap and MLP 4500Set ipx rip update periodic set user Dynamic Routing Protocols Multilink PPP EncapsulationSet ppp multilink off Bridging to a Router Running Cisco IOS Software 16Cisco700 Series Router Configuration Guide Configuring Dhcp Relay, Dhcp Server, and PAT Dhcp Description Dhcp Server Application NotesDhcp Relay Application Notes PAT DescriptionPAT Application Notes Ipcp Address Negotiation Application Notes Ipcp DescriptionSet ip framing none Cisco 765 Series Router Commands PPP Ipcp Negotiation ExampleDhcp Relay with Ipcp Negotiation Example Verify the ConfigurationSet system Dhcp Server with Ipcp Negotiation Example Set dhcp gateway primary 172.168.1.1 cd lan Set dhcp serverSet user PAT with Ipcp Single-Destination Negotiation Example PAT with Ipcp Single-Destination NegotiationSet system Set ip pat po ftp 10.0.0.2 cd lan Dhcp Server with PAT and Ipcp Single-Destination Negotiation Set active Dhcp server Cisco Isdn network Set ip netmask 255.255.255.0 set ip pat on Verify the Configuration 16Cisco700 Series Router Configuration Guide Configuring Remote Capi Capi and RVS-COM Supported D-Channel Protocols Remote Capi Router CommandsSupported Applications Rcapi Command Summary Configuring the Cisco 700 Router as an Rcapi ServerSet rcapi on Set dir Local-router show rcapi status 6Cisco700 Series Router Configuration Guide Token Card and Cisco Secure Authentication Support Token Caching Figure A-2 PAP Client Packet 4Cisco700 Series Router Configuration Guide D E ISP Ipxcp RIP ARP BCP Chap Dhcp Icmp Ipcp Ipxcp ISDN-DCP Mlppp PAP PAT

Related manuals

Manual 8 pages 18.06 Kb