Cisco Systems 700 Dhcp Relay with Ipcp Negotiation Example, Verify the Configuration, Set system

DHCP Relay with IPCP Negotiation Example

Verify the Configuration

You can use the show ip configuration all and show ip route all commands to see the IPCP

negotiation address.

DHCP Relay with IPCP Negotiation Example

This section describes how to configure a remote Cisco 700 series router for DHCP relay with IPCP negotiation to a central-site router running Cisco IOS software.

Figure 5-2 is an illustration of the configuration used in this example.

Figure 5-2

DHCP

client

DHCP Relay with IPCP Negotiation

DHCP relay agent

ISDN network

Cisco 765 Cisco 4500

DHCP server

172.168.100.2

H9231

Cisco 765 Series Router Commands

Following are the commands for configuring the remote Cisco 765 series router for DHCP Relay with IPCP Negotiation with a Cisco 4500 router:

set system 765

set dhcp relay 172.168.100.2 set user 4500

set 1 number phone_number set 2 number phone_number set ip routing on

set ip rip version 2 set ip rip receive v2 set ip rip update linkup reboot

For detailed information regarding the commands listed here, refer to the Cisco 700 Series Router Command Reference.

5-6Cisco700 Series Router Configuration Guide