DHCP Server and PAT with IPCP
Cisco 765 Series Router Commands
Following are the commands for configuring the remote Cisco 765 series router for PAT with IPCP
set system 765
set ppp secret client set ppp password client set dhcp server
set dhcp address 172.168.99.2 128 set dhcp netmask 255.255.255.0
set dhcp gateway primary 172.168.99.1 set ip pat porthandler ftp 172.168.99.3 cd lan
set ip routing on
set ip address 172.168.99.1 set ip netmask 255.255.255.0 set user 4500
set 1 number phone_number set 2 number phone_number set ip routing on
set ip route destination 0.0.0.0/0 gateway 0.0.0.0 set ip address 0.0.0.0
set ip netmask 0.0.0.0 set ip pat on
set active
For detailed information regarding the commands listed here, refer to the Cisco 700 Series Router Command Reference.
Verify the Configuration
When a demand call is made, you can use the show ip config all and show ip route all commands to see the IPCP negotiation address. You can also use the show dhcp config and show ip pat commands to verify the configuration.