Cisco Systems 700 manual Supported D-Channel Protocols, Supported Applications

Page 75

Supported D-Channel Protocols

Modem with full negotiation

CAPI layer B3

Transparent

T.90NL with compatibility with T.70NL, according to T.90 Appendix II

ISO 8208 (X.25 DTE-DTE) modulo 8 and windows size 2, no multiple logical connections

T.30 for fax group 3

Modem with full negotiation

T.30 for fax group 3 (SFF file format [default], sending and receiving up to 14400 bps with ECM option, modulations V.17, V.21, V.27ter, V.29)

Analog modem (sending and receiving up to 14400 bps with V.42 error correction and V.42bis compression option, modulations V.21, V.22, V.22bis, V.23, V.32, V.32bis)

Supported D-Channel Protocols

CAPI support is available only for the ISDN switch type Net3.

Supported Applications

ISDN-DCP supports CAPI and non-CAPI applications. Supported applications consist of those that use one or two B channels for data transfer, different HDLC-based protocols, Euro File transfer, or fax G4; also supported are applications that send bit-transparent data, such as A/Mu lay audio, fax G3, analog modem, or analog telephones.

Remote CAPI Router Commands

The commands used in this chapter have been added to the router user interface to support CAPI. Note that CAPI runs on a remote network device, not the router; the Cisco 700 series router enables remote CAPI applications.

Configuring Remote CAPI 6-3

Image 75
Contents Cisco 700 Series Router Configuration Guide Page N T E N T S Chapter Using Chap Chapter Configuring Dhcp Relay, Dhcp Server, and PAT Token Caching A-2 About This Manual Related Documentation Conventions Set systemname systemname Supported Protocols OverviewSoftware Images Administrative Configuration Options 4Cisco700 Series Router Command Reference Profile Overview Using Profiles with Cisco 700 Series RoutersProfiles and Connections System and Profile ParametersProfile Mode Parameter Set System Mode Parameter SetPermanent Profiles Lists the parameters that can be configured in a profileHost set user tomd Displaying Profile ConfigurationsCreating and Modifying Profiles Removing Profile-Based ValuesChanging Profile Names HostProfile reset user tomdIncoming Calls Deleting ProfilesOutgoing Calls 8Cisco700 Series Router Configuration Guide Basic Configuration Concepts Basic ConfigurationsBridges and Routers ProfilesLANs and WANs Show config Current ConfigurationRemote and Central Sites Host show configSet def Password and SecretStarting Point Additional ReferenceSet autodetection on Setting Spid Autodetection North America onlySet switch dms Setting SPIDs Manually North America onlyBridging Example Bridging with a Cisco 700 Series RouterCisco 700 Series Router Bridging Instructions Routing IP with a Cisco 700 Series Router to an ISPConnecting to an ISP-Example Configuration Set user isp Set number Routing IP to a Central SiteRouting a Cisco 700 Series Router to an ISP Instructions Set system 764 cd lan Set ip addressRouting IP to a Central Site-Example Configuration Set system remote765 set multidestination on cd LAN Central Site IP Routing Command SummarySet ppp auth in chap set ppp secret host cd lan Routing IP and IPX On-DemandRouting IP and IPX On-Demand-Example Configuration Cd LAN On-Demand IP and IPX Routing with PPP InstructionsSet bridging off Central Site On-Demand IP and IPX Routing with PPP Commands18Cisco 700 Series Router Configuration Guide Using Chap Spid Detection North America only IP Static Routing and Callback with Chap AuthenticationSet ip rip version 2 set user Remote Cisco 765 Command SummarySet switch 5ess Set ip rip update off set timeoutIP Static Routing with Chap Authentication and MLP Demand 2 threshold 32 duration 5 set active Reboot Set ip rip update periodic set user Set ppp secret clientIP Static Routing with PAP Authentication IP Static Routing with PAP Authentication and MLPSet bridging off set timeout 360 set active reboot IP Unnumbered Static Routing and Chap with MLP IP Unnumbered Routing and Chap Authentication with MLPSet ppp secret host cd lan IP Static and IPX Static Routing with PPP IP Static and IPX Static Routing with Chap and MLPSet multidestination on Set ip rip update periodic set user4500 IPX Static Routing with Chap and MLPSet ipx rip update periodic set user Multilink PPP Encapsulation Dynamic Routing ProtocolsSet ppp multilink off Bridging to a Router Running Cisco IOS Software 16Cisco700 Series Router Configuration Guide Configuring Dhcp Relay, Dhcp Server, and PAT Dhcp Server Application Notes Dhcp DescriptionPAT Description Dhcp Relay Application NotesPAT Application Notes Ipcp Description Ipcp Address Negotiation Application NotesSet ip framing none PPP Ipcp Negotiation Example Cisco 765 Series Router CommandsVerify the Configuration Dhcp Relay with Ipcp Negotiation ExampleSet system Dhcp Server with Ipcp Negotiation Example Set dhcp server Set dhcp gateway primary 172.168.1.1 cd lanSet user PAT with Ipcp Single-Destination Negotiation PAT with Ipcp Single-Destination Negotiation ExampleSet system Set ip pat po ftp 10.0.0.2 cd lan Dhcp Server with PAT and Ipcp Single-Destination Negotiation Set active Dhcp server Cisco Isdn network Set ip netmask 255.255.255.0 set ip pat on Verify the Configuration 16Cisco700 Series Router Configuration Guide Configuring Remote Capi Capi and RVS-COM Remote Capi Router Commands Supported D-Channel ProtocolsSupported Applications Configuring the Cisco 700 Router as an Rcapi Server Rcapi Command SummarySet rcapi on Set dir Local-router show rcapi status 6Cisco700 Series Router Configuration Guide Token Card and Cisco Secure Authentication Support Token Caching Figure A-2 PAP Client Packet 4Cisco700 Series Router Configuration Guide D E ISP Ipxcp RIP ARP BCP Chap Dhcp Icmp Ipcp Ipxcp ISDN-DCP Mlppp PAP PAT
Related manuals
Manual 8 pages 18.06 Kb