Appendix B Error Messages
Cisco MGM Client Error and Warning Messages
Error Message
Recommended Action You cannot select the same CTPs for the source and secondary source. Select a different source or secondary source and retry.
Error Message
Recommended Action You cannot select the same CTPs for the destination and secondary destination. Select a different destination or secondary destination and retry.
Error Message
Recommended Action You cannot select the same CTPs for the source and destination.
Error Message
Recommended Action Verify that there is at least one link between the selected nodes.
Error Message
Recommended Action Verify that there is at least one link between the selected nodes.
Error Message
Recommended Action The selected link does not exist. The link might have been deleted. Reopen the Circuit wizard and create the circuit.
Error Message
Recommended Action A span has been added for the current hop. If you want to add a new span, remove the existing span and add the new one.
Error Message
Recommended Action Select a span in the current hop.
Error Message
Recommended Action All of the objects are in use for the selected link.
Error Message
Recommended Action The underlying circuit is not in the correct state. The circuit must be in a
Creating or Active state. Reopen the Circuit wizard and try again.
Cisco Media Gateway Manager 5.0 User Guide
| ||
|