Cisco Systems OL-5461-02 appendix Error Message EID-705 Invalid Snmp sendto with errno = value

Page 89

Appendix B Error Messages

Cisco MGM Server Error Messages

Error Message EID-603: Incorrect trap recvfrom with errno = value.

Recommended Action This is an internal processing error. If the problem persists, contact Cisco technical support with this error message.

Error Message EID-604: Failed to parse SNMP trap definition file filename.

Recommended Action The traps.lst file in the bin directory where the Cisco MGM server was installed is corrupted. Delete the traps.lst file and restart the application.

Error Message EID-605: Failed to recover alarm sequence #number to #number for NE ID.

Recommended Action Cisco MGM could not recover all alarms from the NE. There might be events missing in the Alarm Log due to connectivity problems or mangled packets. However, the Alarm Browser will reflect the correct alarm information. In the Domain Explorer window, choose Fault > Alarm Browser to view the current alarms.

Error Message EID-704: Invalid SNMP recvfrom with errno = value.

Recommended Action This is an internal processing error. If the problem persists, contact Cisco technical support with this error message.

Error Message EID-705: Invalid SNMP sendto with errno = value.

Recommended Action This is an internal processing error. If the problem persists, contact Cisco technical support with this error message.

Error Message EID-706: SNMP trap received from unknown NE ID.

Recommended Action SNMP traps are being received from an NE that is not configured on the Cisco MGM server. Check the configured IP addresses for all NEs by viewing the configuration files (startup-config). The IP addresses should match the IP address of the interface used in the “snmp-server trap-source IF” CLI in the NE configuration.

Error Message EID-1402: The OSI daemon lockfile value is missing.

Recommended Action This is an internal processing error. If the problem persists, contact Cisco technical support with this error message.

Error Message EID-1403: The OSI daemon lockfile does not contain the PID.

Recommended Action This is an internal processing error. If the problem persists, contact Cisco technical support with this error message.

Cisco Media Gateway Manager 5.0 User Guide

 

OL-5461-02

B-89

 

Image 89
Contents Error Messages Recommended Action Try relogging into Cisco MGM client Recommended Action Click OK to continue Recommended Action Enter a new passwordRecommended Action Restart Cisco MGM client Recommended Action Continue setting a new passwordRecommended Action Specify the export destination file Recommended Action Enter the IP addressRecommended Action Enter a positive integer Recommended Action Check access rights and disk spaceRecommended Action Enter a number between 0 Recommended Action Enter an ML-series card usernameCisco Media Gateway Manager 5.0 User Guide OL-5461-02 Recommended Action Restart the Cisco MGM client and retry Showmgm Recommended Action Enter a different IP address Recommended Action Reschedule the job Recommended Action Enter a unique server addressError Message EID-216 No partitions for NEs Recommended Action Enter a unique IP address and retry Recommended Action Enter a unique OSS client name and retryRecommended Action Enter a unique EFD name and retry Recommended Action Reenter the passwordRecommended Action Check if the user is logged Recommended Action Redo the EFD changes then, retryRecommended Action Add at least one NE to the EFD Recommended Action Choose a different username Recommended Action Relaunch the windowRecommended Action Reenter the user password Recommended Action Enter the old user password and retryRecommended Action Reenter the confirmation password Recommended Action Select a different userRecommended Action Enter a lockout period between 1 Recommended Action Enter valid entriesRecommended Action Enter a logout period between 1 Recommended Action Enter a valid profile nameRecommended Action Enter a filename for the exported file Recommended Action Enter a value from 30 toRecommended Action Restart the Cisco MGM client Error Message EID-322 Error while initializing table Recommended Action Retry the unlock operation Recommended Action No action is required Recommended Action Enter a valid numberCisco Media Gateway Manager 5.0 User Guide Recommended Action Enter a valid Sntp server IP address Recommended Action Enter a valid protect module value Recommended Action Enter a valid protection group nameRecommended Action Enter a valid working entities value Recommended Action Enter a valid protection type valueRecommended Action Enter a unique name for the new group Recommended Action Try creating the thresholds againRecommended Action Enter a unique IP address for the NE Recommended Action Enter a unique ID for the NERecommended Action Exit and restart the Cisco MGM client Recommended Action Select a group or domain node and retryRecommended Action Enter a name for the group Recommended Action Specify a unique domain nameRecommended Action Enter a name for the domain Cisco Media Gateway Manager 5.0 User Guide OL-5461-02 Recommended Action Enter a unique username Recommended Action Perform the operation againRecommended Action Relaunch the Create User Profile wizard Recommended Action Enter a unique user passwordRecommended Action Enter a valid username Recommended Action Enter a unique user type name Recommended Action Reconfirm the passwordRecommended Action Assign an object to the user Recommended Action Enter a unique GNE name Recommended Action Assign one or more ports to the userClick Finish Recommended Action Enter the community string Recommended Action Enter a unique IP addressRecommended Action Close, then reopen the topology window Recommended Action Log in with the revised user passwordRecommended Action Contact Cisco technical support Recommended Action Specify a write string Recommended Action Contact the system administratorRecommended Action Specify a valid target Recommended Action Enter a unique network partition ID Recommended Action No action is required Recommended Action Recreate the link Recommended Action Recreate the link Recommended Action Choose a different destination node Recommended Action Recreate the circuitCisco Media Gateway Manager 5.0 User Guide Recommended Action Enter a unique circuit name Recommended Action Enter a unique topology nameRecommended Action Enter a topology name Recommended Action Select at least two NEsRecommended Action Select a valid source or destination Recommended Action Select a topology to deleteRecommended Action Select a valid topology segment Recommended Action Select an unprovisioned segmentRecommended Action Select one L2 service Recommended Action Select an L2 serviceRecommended Action Select one L2 service Recommended Action Enter a circuit name Recommended Action Select a slot and retry Recommended Action Specify the destination NE and CTPsRecommended Action Select a port and retry Recommended Action Select an STS or VT and retryRecommended Action Select a span in the current hop Error Message EID-932 Failed to route circuit Recommended Action Delete the associated topologies Recommended Action Contact your system administratorError Message EID-952 Failed to delete stitched nodes Recommended Action Modify the search criteria Recommended Action Enter unique circuit nameRecommended Action Select valid NEs Recommended Action Enter both values Error Message EID-1015 Failed to retrieve received text Example Cisco MGM Server Error MessagesErrno=errornumberfromfile /usr/include/sys/errno.h Recommended Action Select the circuit termination point Recommended Action Close the wizard and try againRecommended Action Choose available points Recommended Action Choose another port Error Message EID-1052 Error occurred while adding the span Error Message EID-1060 Error deleting Error Message EID-3105 createSnmpTrapHandler Snmp Exception Major Server Error Messages Recommended Action Restart the Cisco MGM server IPaddresssocketnumber Recommended Action Select a different topology Error Message EID-826 No ports available for modification Error Message EID-1301Errorstring Error Message EID-2014 Exception string Error Message EID-2030 EventDispatcher received is null Appendix B Error Messages Cisco MGM Server Error Messages Appendix B Error Messages Cisco MGM Server Error Messages Error Message EID-2074 Invalid instance in topology update Address IPaddress Recommended Action Reset the NE again Recommended Action None Recommended Action Contact the Cisco MGM administrator Error Message EID-3031 Error in parsing tick rate XML Error Message EID-4006 Error in creating the SessionManager Appendix B Error Messages Cisco MGM Server Error Messages Appendix B Error Messages Cisco MGM Server Error Messages Minor Server Error Messages Error Message EID-412 No free UDP sockets in pool Error Message EID-705 Invalid Snmp sendto with errno = value Error Message EID-1404 The ping to the OSI daemon failed Error Message EID-2009 Null object is passed Neid Error Message EID-2076 Null NE information Error Message EID-3001 Cannot start collection for value Error Message EID-3005 Cannot write DS-1 PM for value Error Message EID-3047 PM Comm Session is null for NEname Recommended Action Ignore this internal error message Recommended Action Manually back up the configuration Error Message EID-4207 Exception The node is not available 100 101 102 Recommended Action Restart the Cisco MGM server and retry103 104 Recommended Action Try and restore the connection to the NERecommended Action Set the NE state to In Service Location 105State 106Value 107108 109 IPaddress Node 110Timestamp 111Is value 112113 114