Related Features and Technologies
Note The Cisco uBR924 cable access router is typically configured at the headend. Most cable service operators do not permit local configuration at subscriber sites.
Caution Before attempting to reconfigure a Cisco uBR924 cable access router at a subscriber site, contact your network management, provisioning manager, or billing system administrator to ensure remote configuration is allowed. If remote configuration is disabled, settings you make and save at the local site will not remain in effect after the cable access router is reset or powered off and back on. Instead, settings will return to the previous configuration.
Related Features and Technologies
The Cisco uBR924 cable access router is intended to be used in conjunction with a Cisco uBR7200 series universal broadband router or other
Related Documents
For related information on the Cisco uBR924 cable access router, refer to the following documents:
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco uBR924 Cable Access Router Quick Start Guide
Cisco uBR924 Cable Access Router Installation and Configuration Guide
Regulatory Compliance and Safety Info. for the Cisco uBR924 Cable Access Router
Cisco uBR7246 Installation and Configuration Guide
Cisco uBR7223 Installation and Configuration Guide
Cisco uBR7200 Series Configuration Notes
Cisco Network Registrar for the uBR7200 Series
Regulatory and Safety Compliance for the Cisco uBR7246
Regulatory and Safety Compliance for the Cisco uBR7223
Cisco uBR7200 Series Features
Cisco uBR7200 Series Feature Enhancements
Cisco uBR7200 Series Feature Enhancements in Release 12.0
Cisco uBR7200 Series Installation and Configuration Guide
Platforms
The Cisco uBR924 cable access router is a
2Cisco IOS Release 12.0(5)T