show controllers
show controllers cable-modem bpkm
To display information about the baseline privacy key management exchange between the
Cisco uBR924 cable access router and the headend CMTS, use the show controllers
show controllers
Syntax Description
number | Controller number inside the Cisco uBR924 cable access router. |
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
ReleaseModification
11.3 NA | This command was first introduced. |
|
|
Usage Guidelines
Baseline privacy key management exchanges take place only when both the Cisco uBR924 and the CMTS are running code images that support baseline privacy, and the privacy class of service is enabled via the configuration file that is downloaded to the cable access router. Baseline privacy code images for the Cisco uBR924 contain k1 in the code image name.
Examples
The following output is displayed when the headend CMTS does not have baseline privacy enabled:
uBR924# show controllers cable-modem 0 bpkm
CM Baseline Privacy | Key Management |
| |
configuration (in | seconds): |
| |
authorization wait time: | 10 | ||
reauthorization wait time: | 10 | ||
authorization grace time: | 600 | ||
operational wait time: | 1 | ||
rekey wait time: | 1 | ||
tek grace time: | 600 | ||
authorization rej wait time: 60 | |||
kek state: | STATE_B_AUTH_WAIT |
| |
sid 4: |
|
|
|
tek state: No resources assigned