show controllers
show controllers cable-modem filters
To display the registers in the MAC hardware that are used for filtering received frames, use the show controllers
show controllers
Syntax Description
number | Controller number inside the Cisco uBR924. |
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
ReleaseModification
11.3 NA | This command was first introduced. |
|
|
Usage Guidelines
Some of the filtering parameters are MAC hardware addresses, Service IDs (SIDs), and upstream channel IDs.
Troubleshooting Tips for the Cisco uBR924 Cable Access Router 31