Cisco Systems UBR924 manual Show Controllers Cable-Modem Filters Field Descriptions

Page 32

show controllers cable-modem filters

Examples

MAC and SID filter information is displayed in the following example:

uBR924# show controllers cable-modem 0 filters downstream mac message processing:

ds_mac_da_filters:

filter_1=0010.7b43.aa01, filter_2=0000.0000.0000 filter_3=0000.0000.0000, filter_4=0000.0000.0000

ds_mac_da_filter_ctrl=0x71, ds_mac_msg_sof=0x0000 ds_mac_da_mc=01E02F00

map_parser_sids:

sid_1=0x0000, sid_2=0x0000, sid_3=0x0000, sid_4=0x0000 ds_mac_filter_ctrl=0x00, us_channel_id=0x0000 ds_pid=0x0000, mac_msg_proto_ver=FF 00 reg_rang_req_sid=0x0000

downstream data processing: ds_data_da_filter_table:

filter_1 0010.7b43.aa01, filter_2 0000.0000.0000 filter_3 0000.0000.0000, filter_4 0000.0000.0000

ds_data_da_filter_ctrl=0x61, ds_pdu_sof=0xDEAD ds_data_da_mc=01000000

upstream processing:

us_ctrl_status=0x04, Minislots per request=0x01 burst_maps:

map[0]=0 map[1]=0 map[2]=0 map[3]=0 bytes_per_minislot_exp=0x04

us_map_parser_minislot_adv=0x03, ticks_per_minislot=0x08, maint_xmit=0x0001 us_sid_table:

sid_1=0x0000, sid_2=0x0000, sid_3=0x0000, sid_4=0x0000 max_re_req=0x0010, rang_fifo=0x00

Table 5 briefly describes some of the fields shown in the display. For more information, see the

Broadcom documentation for the BCM3300 chip.

Table 5

Show Controllers Cable-Modem Filters Field Descriptions

 

 

 

Field

 

Description

 

 

 

ds_mac_da_filters

 

Shows the MAC address of the cable interface and the MAC address of any Ethernet

 

 

MAC it is bridging.

 

 

ds_mac_da_filter_ctrl

Downstream MAC filter control for data.

 

 

 

ds_mac_msg_sof

 

Downstream MAC message start of frame.

 

 

 

ds_mac_da_mc

 

Downstream MAC control filter for data.

 

 

 

map_parser_sids

 

Service IDs used for upstream bandwidth allocation.

 

 

 

ds_mac_filter_ctrl

 

Downstream MAC filter control for MAC messages.

 

 

 

us_channel_id

 

Upstream channel ID.

 

 

 

ds_pid

 

Downstream packet ID

 

 

mac_msg_proto_ver

Version of the MAC management protocol in use.

 

 

 

reg_rang_req_sid

 

Service ID (SID) field of the ranging request message.

 

 

ds_data_da_filter_table

Downstream data processing filter table.

 

 

ds_data_da_filter_ctrl

Downstream data processing filter control.

 

 

 

ds_pdu_sof

 

Downstream PDU start of frame.

 

 

 

ds_data_da_mc

 

Downstream data processing MAC control.

 

 

 

us_ctrl_status

 

Upstream control status.

 

 

 

32Cisco IOS Release 12.0(5)T

Image 32
Contents Benefits RestrictionsRelated Features and Technologies Related DocumentsRelated Documents List of Terms If MIB MIB-IIList of Terms List of Terms Cmts to Cable Modem Network Topology Troubleshooting Steps Understand How Basic Initialization Works12960 Connect to the Cisco uBR924 CmtsDisplay the Cisco uBR924’s MAC Log File UBR924# show controllers cable-modem 0 mac logCmacloginitialrangingminislots CmaclogpowerlevelisCmaclogadjustrangingoffset CmaclogadjusttxpowerInterpret the MAC Log File and Take Action CmaclogregistrationokCmaclogregrspackmsgqueued CmaclognoprivacyInterpret the MAC Log File and Take Action Event 4-Start Ranging for Power Adjustments Event 3-Obtain Upstream ParametersCmaclogdhcperroracquiringsecsvraddr Event 5-Establish IP ConnectivityEvent 6-Establish the Time of Day Event 7-Establish SecurityEvent 10-Comply with Baseline Privacy CmaclogprivacyfsmstatechangeCmaclogbpkmreqtransmitted CmaclogbpkmrspmsgrcvdUse Additional Troubleshooting Commands Event 11-Enter the Maintenance StateCommand Reference Show controllers cable-modem Examples Show Controllers cable-modemShow Controllers Cable-Modem Field Descriptions Show controllers cable-modem Cisco IOS Release 12.05T Related Commands Show controllers cable-modem bpkm UBR924# show controllers cable-modem 0 bpkmRelated Commands Describes the fields shown in the displayShow controllers cable-modem des DES engine registers are displayed in the following example UBR924# show controllers cable-modem 0 des downstream desRelated Commands Show controllers cable-modem filters Show Controllers Cable-Modem Filters Field Descriptions Show controllers cable-modem filters Show controllers cable-modem lookup-table Mini-slot lookup table is displayed in the following example Show controllers cable-modem lookup-table Related Commands Errors Show controllers cable-modem macCmaclogresetfromdriver ExampleCmaclogwillsearchdsfrequencyband CmaclogallucdsfoundCmaclogprivacynotconfigured CmaclogwatchdogtimerCmaclogresetdhcpwatchdogexpired CmaclogregrspackmessageeventUBR924# show controllers cable-modem 0 mac resets CMACLOGRESETT4EXPIREDCmaclogresetconfigfileparsefailed CmaclogresetlossofsyncCmaclogresettodwatchdogexpired CmaclogresetprivacywatchdogexpiredCmaclogresetservicenotavailable CMACLOGRESETT6RETRIESEXHAUSTEDCmaclogresetnetaccessmissing Cmaclogresetdhcpfailed1600 Interrupts Burst profiles profile UBR924# show controller cable-modem 0 mac state Burst Descriptor Interval Usage Code Show Controllers Cable-Modem MAC State Field Descriptions US ID Show controllers cable-modem mac Related Commands D14=FFF3FFED Show controllers cable-modem phyD12=FFD3FFE0 CC CC CC CC CC 0D 0D CC CC CC CC CC CC CC CC 0D = Ffffff= Fffffe Related Commands Show controllers cable-modem tuner Show controllers cable-modem Debug Commands Statebauthwait UBR924# debug cable-modem bpkm errorsDebug cable-modem bpkm Related Commands Debug cable-modem bridge UBR924# debug cable-modem bridgeRelated Commands Debug cable-modem error Debug cable-modem errorRelated Commands Debug cable-modem interrupts UBR924# debug cable-modem interruptsRelated Commands Debug cable-modem mac Cmaclogdriverinitidbshutdown Debug cable-modem mac log014259 528302.046 Cmaclogdriverinitidbshutdown UBR924# debug cable-modem mac messages ? UBR924# debug cable mac logUBR924# debug cable mac log verbose Debug cable mac messages Fixed QpskOFF EhdrMar 014420 Debug cable-modem map Debug cable-modem mapRelated Commands