Cisco Systems UBR924 manual Related Commands, Describes the fields shown in the display

show controllers cable-modem bpkm

Table 3 describes the fields shown in the display.

Table 3	Show Controllers Cable-Modem bpkm Field Descriptions
Field		Description
authorization wait time		The number of seconds the Cisco uBR924 waits for a reply after sending the
		Authorization Request message to the CMTS.
reauthorization wait time		The number of seconds the Cisco uBR924 waits for a reply after it has sent an
		Authorization Request message to the CMTS in response to a reauthorization request or
		an Authorization Invalid message from the CMTS.
authorization grace time		The number of seconds before the current authorization is set to expire that the grace
		timer begins, signaling the Cisco uBR924 to begin the reauthorization process.
operational wait time		The number of seconds the TEK state machine waits for a reply from the CMTS after
		sending its initial Key Request for its SID’s keying material.
rekey wait time		The number of seconds the TEK state machine waits for a replacement key for this SID
		after the TEK grace timer has expired and the request for a replacement key has been
		made.
tek grace time		The number of seconds before the current TEK is set to expire that the TEK grace timer
		begins, signaling the TEK state machine to request a replacement key.
authorization rej wait time		Number of seconds the Cisco uBR924 waits before sending another Authorization
		Request message to the CMTS after it has received an Authorization Reject message.
kek state		The current state of the key encryption key that the CMTS uses to encrypt the traffic
		encryption keys it sends to the Cisco uBR924.
tek state		The current state of the traffic encryption key state machine for the specified SID.

Related Commands

Command	Description
show controllers cable-modem	Displays high-level controller information about a Cisco
	uBR924 cable access router.
show controllers cable-modem des	Displays information about the Data Encryption Standard
	(DES) engine registers.
show controllers cable-modem filters	Displays the registers in the MAC hardware that are used for
	filtering received frames.
show controllers cable-modem	Displays the mini-slot lookup table inside a Cisco uBR924.
lookup-table
show controllers cable-modem mac	Displays detailed MAC-layer information for a Cisco uBR924.
show controllers cable-modem phy	Displays the contents of the registers used in the downstream
	physical hardware of the Cisco uBR924.
show controllers cable-modem tuner	Displays the settings for the upstream and downstream tuners
	used by a Cisco uBR924.

Troubleshooting Tips for the Cisco uBR924 Cable Access Router 27