Cisco Systems UBR924 manual Debug cable-modem map

debug cable-modem map

debug cable-modem map

To display the timing from MAP messages to sync messages and the timing between MAP messages on a Cisco uBR924 cable access router, use the debug cable-modem map command in privileged EXEC mode. To turn the debugging messages off, use the no form of this command.

[no] debug cable-modem map

Syntax Description

This command has no keywords or arguments.

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

ReleaseModification

11.3 NA This command was first introduced.

Examples

The following example shows display output for the debug cable-modem map privileged EXEC command.

uBR924#		debug cable-modem map
Cable	Modem MAP debugging is on
uBR924#
*Mar	7	20:12:08: 595322.942: Min MAP to sync=72
*Mar	7	20:12:08: 595322.944: Max map to map time is 40
*Mar	7	20:12:08: 595322.982: Min MAP to sync=63
*Mar	7	20:12:08: 595323.110: Max map to map time is 41
*Mar	7	20:12:08: 595323.262: Min MAP to sync=59
*Mar	7	20:12:08: 595323.440: Max map to map time is 46
*Mar	7	20:12:09: 595323.872: Min MAP to sync=58

Troubleshooting Tips for the Cisco uBR924 Cable Access Router 73