Cisco Systems UBR924 manual Show controllers cable-modem phy, D12=FFD3FFE0, D14=FFF3FFED

show controllers cable-modem phy

show controllers cable-modem phy

To display the contents of the registers used in the downstream physical hardware of the Cisco uBR924 cable access router, use the show controllers cable-modem phy command in privileged EXEC mode.

show controllers cable-modem phy {receive transmit}

Syntax Description

receive	Displays all receiver registers in the downstream physical hardware.
transmit	Displays all transmitter registers in the upstream physical hardware.

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

ReleaseModification

11.3 NA This command was first introduced.

Usage Guidelines

To understand the output from this command, consult the Broadcom specifications for the BCM3116 and BCM3037 chips.

Examples

Physical receive registers are displayed in the following example:

uBR924# show controllers cable-modem 0 phy receive BCM3116 Receiver Registers: Chip ID = C2C1

rstctl=	frzctl=20	qamctl=1B	lmsctl=0B	tpctl=00	fmtctl=24
ffectl=3F	irqsts=09	irqmask=00	stoscm=9E	rstctr=00	frzctl2=46
dvctl=30	idepth=55 eqlctl=00		tstctl=02 berctl=00 clkset=00
tunset=00	tunctl=03

FFC coefficient registers:

F0=0067FFBC F1=FF880080 F2=00C1FEFB F3=FF75019D

F4=00C5FD89 F5=FF6D0485 F6=FC95F690 F7=2D280000

DFE coefficient registers:

D00=0636031E	D01=FBDD0314	D02=0077FD39	D03=001B00C6
D04=0024FF74	D05=0015007E	D06=000CFFC4	D07=FFC0004B
D08=0044FFF6	D09=FFE00019	D10=00190005	D11=FFD3FFAD
D12=FFD3FFE0	D13=001A000A	D14=FFF3FFED	D15=0008FFFD
D16=FFFC0024	D17=0023FFDF	D18=0029FFFF	D19=000D001E
D20=00020017	D21=00250001	D22=0007FFF4	D23=FFF60014

Troubleshooting Tips for the Cisco uBR924 Cable Access Router 53