Chapter 2 Preparing for Installation
Precautions for
Cabling
Use the cables in the accessory kit to connect the GSS console port to a console or computer that is running a console program. In addition to using the console cable, use the provided standard Ethernet cable to connect the GSS to your network. Refer to Chapter 1, Introduction, for information on cable requirements.
Precautions for Rack-Mounting
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
Observe the following precautions for rack stability and safety. Also refer to the rack installation documentation accompanying the rack for specific warnings and caution statements and procedures.
Note Component refers to any server, storage system, or appliance, and to various peripherals or supporting hardware.
•Do not move large racks by yourself. Due to the height and weight of the rack, a minimum of two people are needed to accomplish this task.
•Ensure that the rack is level and stable before extending a component from the rack.
•Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80% of the branch circuit rating.
•Ensure that proper airflow is provided to components in the rack.
•Do not step or stand on any system or component when servicing other systems and components in a rack.
•This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
|
| Cisco Global Site Selector 4491 Hardware Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|