Cisco Systems 78-16356-01 manual Connecting AC Power

Chapter 3 Installing the GSS

Connecting AC Power

2.Connect the other end of the network cable to a hub or switch in your network.

3.For console connections, plug the cable into the console port on the GSS back panel.

4.Connect the other end of the console cable to a console or a communications server.

Connecting AC Power

Warning	This equipment must be grounded. Never defeat the ground conductor or operate
	the equipment in the absence of a suitably installed ground conductor. Contact
	the appropriate electrical inspection authority or an electrician if you are uncertain
	that suitable grounding is available. Statement 1024

To connect AC power to your GSS:

1.Ensure that you have reviewed the safety information outlined in Chapter 2, Preparing for Installation.

2.Plug the AC power cord into the power cord receptacle at the rear of the GSS (see Figure 3-10).

3.Connect the other end of the power cord to a power source.

4.Power up all externally-connected devices.

5.Press the power control button on the front of the GSS.

	Cisco Global Site Selector 4491 Hardware Installation Guide
3-16	78-16356-01