Cisco Systems 78-16356-01 manual Checking the Front Panel LEDs, GSS 4491 Front Panel LEDs

Chapter 3 Installing the GSS

Checking the Front Panel LEDs

4.Once you create a session, choose Save As from the File menu to save the connection description. Saving the connection description has the following two advantages:

–The next time you launch HyperTerminal, the session is listed as an option under Start > Programs > Accessories > HyperTerminal > Name_of_session. This option lets you reach the CLI prompt directly without repeating the configuration steps.

–You can connect your cable to a different device without configuring a new HyperTerminal session. If you use this option, ensure that you connect to the same port on the new device as was configured in the saved HyperTerminal session. Otherwise, a blank screen appears without a prompt.

Checking the Front Panel LEDs

When the GSS is up and running, observe the front panel LEDs to monitor GSS operating status. Figure 3-11shows the location of front panel LEDs, and Table 3-2describes their function.

Figure 3-11 GSS 4491 Front Panel LEDs

1 3

2 4

0

1

i

119603

5

	Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01		3-19