Cisco Systems 78-16356-01 manual Rack Rail Components

Chapter 3 Installing the GSS

Installing Your GSS

The GSS can be installed in a system 1U rack. Figure 3-1illustrates the four-post rack rail components. Table 3-1describes each four-post rack rail component.

Figure 3-1 Rack Rail Components

1

2

119960

3 4 5

Table 3-1 Four-Post Rack Components

1	Left side telescopic rail	4	Round head screws (6)
2	Right side telescopic rail	5	Cage nuts (6)
3	Round head screws with washer (9)

The procedure to install the GSS into a four-post rack is divided into two parts:

•Attaching the Telescopic Rails to the Rack Assembly

•Inserting the GSS into the Rack

To install the GSS in a four-post rack by using a two-post rack bracket, see the “Attaching a Two-Post Rack Bracket to the GSS” section.

	Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01		3-5