Cisco Systems 78-16356-01 manual Connecting Cables, GSS Back Panel Ports and Connectors

Chapter 3 Installing the GSS

Connecting Cables

Connecting Cables

Warning Do not work on the GSS or connect or disconnect cables during periods of lightning activity.

To connect network and console cables to your GSS 4491:

1.For network connections, connect a Category 3, 4, or 5 unshielded twisted-pair (UTP) cable to the Ethernet 0 or Ethernet 1 connector on the GSS back panel (Figure 3-10).

Note The 100BASE-TX/1000BASE-TX Ethernet standard requires that you use standard four twisted-pair Category 5e cable at lengths up to 328.08 ft. (100 m).

Figure 3-10 GSS Back Panel Ports and Connectors

1

2

119605

3 4

1	AC power receptacle	3	RJ-45 Ethernet 1 connector with
			10/100/1000-Mbit/s operation
2	Console/serial connector	4	RJ-45 Ethernet 0 connector with
			10/100/1000-Mbit/s operation

	Cisco Global Site Selector 4491 Hardware Installation Guide
78-16356-01		3-15