Cabletron Systems manual Chapter Installation, Unpacking the DELHE-UA

CHAPTER 2

INSTALLATION

To install the DELHE-UA the following items are required:

•Antistatic wrist strap

•Phillips screwdriver

•Fast Ethernet (Port) Interface Modules (FEPIMs) in the appropriate media

Before attempting to use the DELHE-UA you should be familiar with the IEEE 802.3, 802.3 10BASE-T,and 802.3u 100BASE-T Specifications.

2.1UNPACKING THE DELHE-UA

The DELHE-UA and the host platform are sensitive to static

!discharges. Use an antistatic strap and observe all static precautions during this procedure. Failure to do so could result in damage to the DELHE-UA, host module or device.

Unpack the DELHE-UA as follows:

1.Remove the DELHE-UA from the shipping box.

2.Leave the module in its antistatic bag until you are ready to install it.

3.Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap package for proper use).

DELHE-UA User’s Guide 2-1