Cabletron Systems DELHE-UA manual Installing Fast Ethernet Port Interface Modules

Installing Fast Ethernet (Port) Interface Modules

Standoff Screws

FEPIM

Coverplate

FEPIM 1

2

DELHE-UA

SP

coverplate_remove

Figure 2-1 Removing the FEPIM Coverplate

Before installing a DELFX-UI or DELF3-UI module into the host

! module, remove the protective cover on the SC connector.

2.Refer to Figure 2-2. Gently pull the faceplate of the DELHE-UA forward to allow room for the FEPIM to be aligned over the connector.

3.Align the FEPIM connector into the DELHE-UA connector pins. See Figure 2-2.

Ensure that the FEPIM connector aligns with the DELHE-UA

!connector pins to prevent bending the pins. This can damage both the DELHE-UA and the FEPIM.

DELHE-UA User’s Guide 2-3