Cabletron Systems DELHE-UA manual Installing the Fepim

Chapter 2: Installation

DELFX-UI

Module

Module

Connector

Rear

Standoff

10 100

DELHE-UA

DELHE-UA

Connector

Front

Standoffs

feinstall

Figure 2-2 Installing the FEPIM

4.Press down firmly on the FEPIM until the pins slide all the way into the DELHE-UA connector. Ensure that the FEPIM seats flush on the standoffs.

5.Secure the FEPIM using the screws enclosed in the FEPIM packaging. The screw used to attach the rear of the FEPIM to the standoff is optional and not necessary for proper installation. Refer to Figure 2-2.

If SC protective covers were removed from a fiber FEPIM, replace the covers until the port is connected to the network to reduce the chance of dust and contaminants entering the port.

2-4 DELHE-UA User’s Guide