Extron electronic HSA 822 manual HSA Suspended in the Foam

Page 23

8.Insert the opposite end of the HSA 822 and the clamshell into the remaining foam shell (see figure 28). Firmly push the foam shells together as far as they will go to completely suspend the HSA and clamshell. The sides of the clamshell protrude through slots in the foam.

9.Lower the foam-protected HSA into the shipping carton (see figure 29).

Figure 28. HSA Suspended in the Foam

Figure 29. Placing the HSA in the Shipping Carton

10.Close the shipping carton and seal it with high quality shipping tape.

11.Ship the HSA to Extron using a reputable shipping company.

36 HSA 822 Hideaway Enclosure • Packaging for Shipment

HSA 822 Hideaway Enclosure • Packaging for Shipment 37

Image 23
Contents User Guide Extron Warranty 安全须知 中文 Contents About the HSA 822 Hideaway Enclosure IntroductionHSA 822 and RGB 580xi Configuration FeaturesInstallation Overview InstallationPreparing the Table and Mounting the Enclosure Preparing the Routing TemplateCutting the Opening with a Router RGB 580xi SI AAP Cabling and Installing the AAPsCabling the Enclosure Bottom Panel FeaturesBezels Routing the AAP CablesReplacing an AAP Maintenance ModificationsRemoving the AAP Panel Replacing the BezelsRemoving and Replacing the Enclosure Removing the HSA 822 from the Table Replacing the Gas LiftTop Panel Bracket Frame Clevis Nut Adjusting the Height of the Top Surface Adjusting the Top SurfaceReference Information SpecificationsPart Numbers Template, Replacement Parts, and AccessoriesInterface Accessories Top Plate DimensionsHSA Packaging for ShipmentAttaching the Clamshell HSA Suspended in the Foam
Related manuals
Manual 28 pages 60.55 Kb