Extron electronic manual Introduction, About the HSA 822 Hideaway Enclosure

Page 5

Introduction

This section gives an overview of the Extron HSA 822 Hideaway Enclosure Series and describes its features. Topics that are covered include:

About the HSA 822 Hideaway Enclosure

Features

About the HSA 822 Hideaway Enclosure

The HSA 822 is a furniture-mounted, architectural solution for inconspicuous computer video interface connector access and control.

The HSA 822 provides space for four double space (double-height) or eight single space Extron Architectural Adapter Plates (AAPs), two standard grounded AC power receptacles, and four RJ-45 CAT 6 connectors (see figure 1). The HSA is available in a US version and international versions. Several different types of power receptacles are available for the international version, including EU, Universal, and Australian receptacles.

NOTE: The Universal AC outlet is fully compatible with Europlug, British, Indian, Danish, and Italian plug types. See the

Universal AC Outlet Compatibility Guide on the Extron

website, www.extron.com, for compatibility details on all plug types.

Closed

Open

Figure 1. HSA 822 Hideaway Enclosure

The AAP spaces and RJ-45 connectors are arranged back-to-back, while the AC receptacles are back-to-back on the sides perpendicular to the AAPs. Cabling inside the enclosure runs the AC power line and RJ-45 signal lines from the connectors on the AAP panels to connectors on the underside of the enclosure.

ii

HSA 822 Hideaway Enclosure • Contents

HSA 822 Hideaway Enclosure • Introduction

1

Image 5
Contents User Guide Extron Warranty 安全须知 中文 Contents About the HSA 822 Hideaway Enclosure IntroductionHSA 822 and RGB 580xi Configuration FeaturesInstallation Overview InstallationPreparing the Table and Mounting the Enclosure Preparing the Routing TemplateCutting the Opening with a Router RGB 580xi SI AAP Cabling and Installing the AAPsCabling the Enclosure Bottom Panel FeaturesBezels Routing the AAP CablesReplacing an AAP Maintenance ModificationsRemoving the AAP Panel Replacing the BezelsRemoving and Replacing the Enclosure Removing the HSA 822 from the Table Replacing the Gas LiftTop Panel Bracket Frame Clevis Nut Adjusting the Height of the Top Surface Adjusting the Top SurfaceReference Information SpecificationsInterface Accessories Template, Replacement Parts, and AccessoriesTop Plate Dimensions Part NumbersHSA Packaging for ShipmentAttaching the Clamshell HSA Suspended in the Foam
Related manuals
Manual 28 pages 60.55 Kb