Extron electronic XTP T UWP 202 manual Installation Operation, Installation Overview

Page 10

Installation and

Operation

This section contains information for mounting, connecting, and wiring the XTP T UWP 202. Topics in this section include:

•Installation Overview

•Installing the Metal Junction Box or Mud Ring

•Rear and Side Panel Connectors

•Mounting the XTP T UWP 202

•Front Panel Connectors

•Making Connections

•Operation

Installation Overview

The XTP T UWP 202 can be installed into the provided mud ring or an UL Listed metal electrical junction box.

ATTENTION: If using a junction box, use a metal one only.

1.Prepare the mounting surface.

CAUTION: Risk of personal injury. Failure to check the items listed below may result in personal injury.

ATTENTION: Failure to check the items listed below may result in property damage.

•Ensure there are no utility cables or pipes at the intended location that might be damaged or cause injury when installing the device.

•Check that the installation meets building, electrical, and safety codes.

•Ensure there is sufficient space behind the device.

•Choose a location that will allow cable runs without interference.

NOTES:

•Cables may need to be installed in the wall or conduits before installation.

•The mud ring does not require attachment to wall studs.

•For metal junction boxes, refer to the manufacturer for more installation requirements.

2.Cut a hole in the mounting surface (see Cutting an Opening in the Mounting Surface on page 5).

3.Install the mud ring or metal junction box in the mounting surface (see Installing the Mud Ring on page 6 or Installing a UL Listed Metal Junction Box on page 7).

XTP T UWP 202 Wallplate Transmitter • Installation and Operation

4

Page 9 Page 11
Image 10
Page 9 Page 11
Contents XTP T UWP Safety Instructions FCC Class a Notice Registered TrademarksConventions Used in this Guide Specifications AvailabilitySoftware Commands NotificationsContents XTP T UWP 202 Wallplate Transmitter Contents About this Guide IntroductionAbout the XTP T UWP Key Features Typical Point-to-Point Application Diagram LAN Model ShownXTP T UWP 202 Wallplate Transmitter Introduction Installation Operation Installation OverviewInstalling the Metal Junction Box or Mud Ring Cutting an Opening in the Mounting SurfaceInstalling the Mud Ring Installing the Mud Ring with Backing ClipsInstalling a UL Listed Metal Junction Box Rear and Side Panel ConnectorsXTP output connector RS-232 and IR Over XTP connector RS-232 IR Mounting the XTP T UWP XTP T UWPFront Panel Connectors Wiring a TRS Connector for AudioSelected Hdmi Embedded Analog Audio Audio Sent Over XTP Making ConnectionsHdmi Connection Audio PresentSupported cables TP Cable Termination and RecommendationsCable recommendations Wiring the RS-232 and IR Over XTP Connector RS-232 and IR Over XTP CommunicationPower Connection Local powerPower injector Remote powerDirect power from an XTP matrix switcher Indicators OperationFactory Reset Reset ModesReset Mode Summary Mode Activation Result Purpose/Notes ModeSIS Programming Guide SIS Configuration ControlHost Device Connection Host-to-Device and Device-to-Host CommunicationUsing the Command and Response Tables for SIS Commands Error ResponsesSymbol Definitions Input Commands Command and Response Tables for SIS CommandsAudio Configuration Commands Picture Adjustment Commands Analog Only Preset CommandsHdcp authorized device Hdmi input only Edid Commands Advanced Configuration CommandsFactory defaults Test patternXTP System Configuration Software Installing the XTP System Configuration SoftwareUsing the XTP System Configuration Software ConnectionsDisconnect Top MenuFile menu ExitUpdate Firmware Confirm Disconnect Dialog BoxHelp Help menuAbout the Software Extron WebsiteDevice Settings AV Controls panelInput/Output tab Input/Output TabInput Presets panel Image Settings panelAnalog Video tab Audio tab Input format panelFactory reset Auto-input Switching panelGeneral tab General Information section Signal Information sectionDevice Information panel Audio Information sectionTo assign Edid to selected inputs Edid MinderAssign Edid To assign Edid to all inputsSet favorite Edid Import EdidSave output Edid Edid filtersUpdating Firmware with Firmware Loader Reference InformationDownloading Extron Firmware Loader Installing Firmware Loader Navigating to Firmware LoaderDownloading Firmware Downloading Firmware from the Extron WebsiteInstalling Firmware with Firmware Loader Add Device... Dialog BoxMounting Template Mounting Template for 2-gang Mud RingsExtron Warranty

XTP T UWP 202 specifications

The Extron XTP T UWP 202 is a state-of-the-art, two-gang wallplate transmitter designed for seamless integration into professional AV systems. As part of the XTP system by Extron, it leverages advanced technologies to ensure high-quality signal distribution over long distances, supporting both digital and analog video formats.

One of the standout features of the XTP T UWP 202 is its ability to transmit HDMI, along with audio and control signals, through a single CATx cable. This capability significantly simplifies installation and reduces cable clutter, making it an ideal choice for modern classrooms, conference rooms, and other professional environments. The wallplate connects directly to the XTP CrossPoint matrix switchers, allowing users to take advantage of centralized signal management.

The XTP T UWP 202 supports resolutions up to 4K@60Hz, covering a broad range of applications that require high-definition video output. The device is also equipped with EDID (Extended Display Identification Data) management, which guarantees optimal signal delivery by enabling automatic communication with the receiving display.

Another important aspect of the XTP T UWP 202 is its integrative capabilities. The wallplate includes a USB input for easy access to data sources, enhancing the overall connectivity of the AV system. Additionally, it supports Control Network, allowing integration with various control systems to manage connected devices effortlessly.

The design of the XTP T UWP 202 is user-friendly, featuring an intuitive layout that ensures ease of use for operators. The robust construction and sleek aesthetic allow it to blend seamlessly into any wall, while the included customizable labeling options help identify input sources clearly.

Moreover, the XTP T UWP 202 is equipped with anti-jitter technology, which helps to maintain signal integrity and reduces the chances of video artifacts, ensuring a reliable performance.

In summary, the Extron XTP T UWP 202 combines advanced transmission technology with high-definition video support and integrative features, making it a vital component for any professional AV installation. Its user-friendly design, combined with robust functionality, positions it as an excellent choice for users looking to optimize their AV experience.
Top Page Image Contents