Extron electronic XTP T UWP 202 manual Device Settings, AV Controls panel

Page 34

Device Settings

The Device Settings screen allows a user to view and edit various device settings for the device directly connected to the PC running the XTP software. Click the Device Settings icon (see figure 26, 1) on the Global Navigation bar to open the Device Settings screen.

Figure 26. Transmitter Device Settings Screen

AV Controls panel

The AV Controls panel, located on the left, is used to selection an input.

2Input selection — Click an Input button to select an input. As a new input is selected, the summary within the device information panel (to the far right in figure 26) changes to reflect the currently selected input.

NOTE: The signal indicators on the AV input buttons display green when a signal is present on the corresponding input or gray when there is no signal present.

XTP T UWP 202 Wallplate Transmitter • XTP System Configuration Software 28

Image 34

Contents XTP T UWP Safety Instructions FCC Class a Notice Registered TrademarksConventions Used in this Guide Specifications AvailabilitySoftware Commands NotificationsContents XTP T UWP 202 Wallplate Transmitter Contents About this Guide IntroductionAbout the XTP T UWP Key Features Typical Point-to-Point Application Diagram LAN Model ShownXTP T UWP 202 Wallplate Transmitter Introduction Installation Operation Installation OverviewInstalling the Metal Junction Box or Mud Ring Cutting an Opening in the Mounting SurfaceInstalling the Mud Ring Installing the Mud Ring with Backing ClipsInstalling a UL Listed Metal Junction Box Rear and Side Panel ConnectorsXTP output connector RS-232 and IR Over XTP connector RS-232 IR Mounting the XTP T UWP XTP T UWPFront Panel Connectors Wiring a TRS Connector for AudioSelected Hdmi Embedded Analog Audio Audio Sent Over XTP Making ConnectionsHdmi Connection Audio PresentSupported cables TP Cable Termination and RecommendationsCable recommendations Wiring the RS-232 and IR Over XTP Connector RS-232 and IR Over XTP CommunicationPower Connection Local powerPower injector Remote powerDirect power from an XTP matrix switcher Indicators OperationFactory Reset Reset ModesReset Mode Summary Mode Activation Result Purpose/Notes ModeSIS Programming Guide SIS Configuration ControlHost Device Connection Host-to-Device and Device-to-Host CommunicationUsing the Command and Response Tables for SIS Commands Error ResponsesSymbol Definitions Input Commands Command and Response Tables for SIS CommandsAudio Configuration Commands Picture Adjustment Commands Analog Only Preset CommandsHdcp authorized device Hdmi input only Edid Commands Advanced Configuration CommandsFactory defaults Test patternXTP System Configuration Software Installing the XTP System Configuration SoftwareUsing the XTP System Configuration Software ConnectionsDisconnect Top MenuFile menu ExitUpdate Firmware Confirm Disconnect Dialog BoxHelp Help menuAbout the Software Extron WebsiteDevice Settings AV Controls panelInput/Output tab Input/Output TabInput Presets panel Image Settings panelAnalog Video tab Audio tab Input format panelFactory reset Auto-input Switching panelGeneral tab General Information section Signal Information sectionDevice Information panel Audio Information sectionTo assign Edid to selected inputs Edid MinderAssign Edid To assign Edid to all inputsSet favorite Edid Import EdidSave output Edid Edid filtersUpdating Firmware with Firmware Loader Reference InformationDownloading Extron Firmware Loader Installing Firmware Loader Navigating to Firmware LoaderDownloading Firmware Downloading Firmware from the Extron WebsiteInstalling Firmware with Firmware Loader Add Device... Dialog BoxMounting Template Mounting Template for 2-gang Mud RingsExtron Warranty

XTP T UWP 202 specifications

The Extron XTP T UWP 202 is a state-of-the-art, two-gang wallplate transmitter designed for seamless integration into professional AV systems. As part of the XTP system by Extron, it leverages advanced technologies to ensure high-quality signal distribution over long distances, supporting both digital and analog video formats.

One of the standout features of the XTP T UWP 202 is its ability to transmit HDMI, along with audio and control signals, through a single CATx cable. This capability significantly simplifies installation and reduces cable clutter, making it an ideal choice for modern classrooms, conference rooms, and other professional environments. The wallplate connects directly to the XTP CrossPoint matrix switchers, allowing users to take advantage of centralized signal management.

The XTP T UWP 202 supports resolutions up to 4K@60Hz, covering a broad range of applications that require high-definition video output. The device is also equipped with EDID (Extended Display Identification Data) management, which guarantees optimal signal delivery by enabling automatic communication with the receiving display.

Another important aspect of the XTP T UWP 202 is its integrative capabilities. The wallplate includes a USB input for easy access to data sources, enhancing the overall connectivity of the AV system. Additionally, it supports Control Network, allowing integration with various control systems to manage connected devices effortlessly.

The design of the XTP T UWP 202 is user-friendly, featuring an intuitive layout that ensures ease of use for operators. The robust construction and sleek aesthetic allow it to blend seamlessly into any wall, while the included customizable labeling options help identify input sources clearly.

Moreover, the XTP T UWP 202 is equipped with anti-jitter technology, which helps to maintain signal integrity and reduces the chances of video artifacts, ensuring a reliable performance.

In summary, the Extron XTP T UWP 202 combines advanced transmission technology with high-definition video support and integrative features, making it a vital component for any professional AV installation. Its user-friendly design, combined with robust functionality, positions it as an excellent choice for users looking to optimize their AV experience.