Extron electronic XTP T UWP 202 manual Edid Minder, Assign Edid, To assign Edid to selected inputs

Page 40

EDID Minder

Use the EDID Minder screen to assign unique EDID to the input or match current output resolutions to the input. Click the EDID Minder icon (see figure 31, 1) on the global navigation bar. The EDID Minder screen opens.

The EDID Minder screen displays a table of EDID options and connected output devices, which are each represented by output display icons.

Factory default EDID options are displayed in blue.

Connected output resolutions and devices are displayed in green.

Custom loaded or saved EDID options are displayed in yellow.

Figure 31. EDID Minder Screen

Assign EDID

To assign EDID to selected inputs:

1.Select an available EDID setting (represented by a blue, green, or yellow output display icon) from the Favorites, Connected Outputs, or Available EDID panel (see

figure 30, 2-4).

2.In the list of inputs on the right side of the screen, select the check box of the connected input (see figure 30, 5).

3.Click the Assign button below the input area (see figure 30, 6).

TIP: Alternatively, EDID can be assigned by dragging and dropping the desired EDID onto the input.

To assign EDID to all inputs:

1.Select an available EDID setting (represented by a blue, green, or yellow output display icon) from the Favorites, Connected Outputs, or Available EDID panel (see figure 30, 2-4).

2.Below the list of inputs on the right side of the screen, click the Assign to All button (see figure 30, 7).

XTP T UWP 202 Wallplate Transmitter • XTP System Configuration Software 34

Image 40
Contents XTP T UWP Safety Instructions FCC Class a Notice Registered TrademarksSpecifications Availability Software CommandsConventions Used in this Guide NotificationsContents XTP T UWP 202 Wallplate Transmitter Contents About this Guide IntroductionAbout the XTP T UWP Key Features Typical Point-to-Point Application Diagram LAN Model ShownXTP T UWP 202 Wallplate Transmitter Introduction Installation Operation Installation OverviewInstalling the Metal Junction Box or Mud Ring Cutting an Opening in the Mounting SurfaceInstalling the Mud Ring Installing the Mud Ring with Backing ClipsInstalling a UL Listed Metal Junction Box Rear and Side Panel ConnectorsXTP output connector RS-232 and IR Over XTP connector RS-232 IR Mounting the XTP T UWP XTP T UWPFront Panel Connectors Wiring a TRS Connector for AudioMaking Connections Hdmi ConnectionSelected Hdmi Embedded Analog Audio Audio Sent Over XTP Audio PresentSupported cables TP Cable Termination and RecommendationsCable recommendations Wiring the RS-232 and IR Over XTP Connector RS-232 and IR Over XTP CommunicationPower Connection Local powerPower injector Remote powerDirect power from an XTP matrix switcher Indicators OperationReset Modes Reset Mode Summary Mode Activation Result Purpose/NotesFactory Reset ModeSIS Configuration Control Host Device ConnectionSIS Programming Guide Host-to-Device and Device-to-Host CommunicationUsing the Command and Response Tables for SIS Commands Error ResponsesSymbol Definitions Input Commands Command and Response Tables for SIS CommandsAudio Configuration Commands Picture Adjustment Commands Analog Only Preset CommandsEdid Commands Advanced Configuration Commands Factory defaultsHdcp authorized device Hdmi input only Test patternXTP System Configuration Software Installing the XTP System Configuration SoftwareUsing the XTP System Configuration Software ConnectionsTop Menu File menuDisconnect ExitUpdate Firmware Confirm Disconnect Dialog BoxHelp menu About the SoftwareHelp Extron WebsiteDevice Settings AV Controls panelInput/Output tab Input/Output TabInput Presets panel Image Settings panelAnalog Video tab Audio tab Input format panelFactory reset Auto-input Switching panelGeneral tab Signal Information section Device Information panelGeneral Information section Audio Information sectionEdid Minder Assign EdidTo assign Edid to selected inputs To assign Edid to all inputsImport Edid Save output EdidSet favorite Edid Edid filtersUpdating Firmware with Firmware Loader Reference InformationDownloading Extron Firmware Loader Installing Firmware Loader Navigating to Firmware LoaderDownloading Firmware Downloading Firmware from the Extron WebsiteInstalling Firmware with Firmware Loader Add Device... Dialog BoxMounting Template Mounting Template for 2-gang Mud RingsExtron Warranty

XTP T UWP 202 specifications

The Extron XTP T UWP 202 is a state-of-the-art, two-gang wallplate transmitter designed for seamless integration into professional AV systems. As part of the XTP system by Extron, it leverages advanced technologies to ensure high-quality signal distribution over long distances, supporting both digital and analog video formats.

One of the standout features of the XTP T UWP 202 is its ability to transmit HDMI, along with audio and control signals, through a single CATx cable. This capability significantly simplifies installation and reduces cable clutter, making it an ideal choice for modern classrooms, conference rooms, and other professional environments. The wallplate connects directly to the XTP CrossPoint matrix switchers, allowing users to take advantage of centralized signal management.

The XTP T UWP 202 supports resolutions up to 4K@60Hz, covering a broad range of applications that require high-definition video output. The device is also equipped with EDID (Extended Display Identification Data) management, which guarantees optimal signal delivery by enabling automatic communication with the receiving display.

Another important aspect of the XTP T UWP 202 is its integrative capabilities. The wallplate includes a USB input for easy access to data sources, enhancing the overall connectivity of the AV system. Additionally, it supports Control Network, allowing integration with various control systems to manage connected devices effortlessly.

The design of the XTP T UWP 202 is user-friendly, featuring an intuitive layout that ensures ease of use for operators. The robust construction and sleek aesthetic allow it to blend seamlessly into any wall, while the included customizable labeling options help identify input sources clearly.

Moreover, the XTP T UWP 202 is equipped with anti-jitter technology, which helps to maintain signal integrity and reduces the chances of video artifacts, ensuring a reliable performance.

In summary, the Extron XTP T UWP 202 combines advanced transmission technology with high-definition video support and integrative features, making it a vital component for any professional AV installation. Its user-friendly design, combined with robust functionality, positions it as an excellent choice for users looking to optimize their AV experience.