Extron electronic XTP T UWP 202 manual FCC Class a Notice, Registered Trademarks

Page 3

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.

ATTENTION: The Twisted Pair Extension technology works with shielded twisted pair (STP) cables only. To ensure FCC Class A and CE compliance, STP cables and STP connectors are

also required.

For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory Compliance Guide” on the Extron website.

Copyright

© 2014 Extron Electronics. All rights reserved.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks(®), registered service marks(SM), and trademarks(TM) are the property of

RGB Systems, Inc. or Extron Electronics:

Registered Trademarks (®)

AVTrac, Cable Cubby, CrossPoint, eBUS, EDID Manager, EDID Minder, Extron, Flat Field, GlobalViewer, Hideaway, Inline, IP Intercom,

IP Link, Key Minder, LockIt, MediaLink, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, System INTEGRATOR, TeamWork, TouchLink, VLock, VersaTools, VNMatrix, VoiceLift, WallVault, WindoWall, XTP and XTP Systems

Registered Service Mark (SM) : S3 Service Support Solutions

Trademarks ()

AAP, AFL (AccuRate Frame Lock), ADSP (Advanced Digital Sync Processing), AutoImage, CDRS (Class D Ripple Suppression), DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), Driver Configurator, DSP Configurator, DSVP (Digital Sync Validation Processing), FastBite, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, ProDSP, QS-FPC (QuickSwitch Front Panel Controller), ScopeTrigger, SIS, Simple Instruction Set, SkewFree, SpeedNav, TripleAction Switching, XTRA, ZipCaddy, ZipClip

Image 3
Contents XTP T UWP Safety Instructions Registered Trademarks FCC Class a NoticeNotifications Specifications AvailabilitySoftware Commands Conventions Used in this GuideContents XTP T UWP 202 Wallplate Transmitter Contents Introduction About this GuideAbout the XTP T UWP Typical Point-to-Point Application Diagram LAN Model Shown Key FeaturesXTP T UWP 202 Wallplate Transmitter Introduction Installation Overview Installation OperationCutting an Opening in the Mounting Surface Installing the Metal Junction Box or Mud RingInstalling the Mud Ring with Backing Clips Installing the Mud RingRear and Side Panel Connectors Installing a UL Listed Metal Junction BoxXTP output connector RS-232 and IR Over XTP connector RS-232 IR XTP T UWP Mounting the XTP T UWPWiring a TRS Connector for Audio Front Panel ConnectorsAudio Present Making ConnectionsHdmi Connection Selected Hdmi Embedded Analog Audio Audio Sent Over XTPTP Cable Termination and Recommendations Supported cablesCable recommendations RS-232 and IR Over XTP Communication Wiring the RS-232 and IR Over XTP ConnectorLocal power Power ConnectionRemote power Power injectorDirect power from an XTP matrix switcher Operation IndicatorsMode Reset ModesReset Mode Summary Mode Activation Result Purpose/Notes Factory ResetHost-to-Device and Device-to-Host Communication SIS Configuration ControlHost Device Connection SIS Programming GuideError Responses Using the Command and Response Tables for SIS CommandsSymbol Definitions Command and Response Tables for SIS Commands Input CommandsAudio Configuration Commands Preset Commands Picture Adjustment Commands Analog OnlyTest pattern Edid Commands Advanced Configuration CommandsFactory defaults Hdcp authorized device Hdmi input onlyInstalling the XTP System Configuration Software XTP System Configuration SoftwareConnections Using the XTP System Configuration SoftwareExit Top MenuFile menu DisconnectConfirm Disconnect Dialog Box Update FirmwareExtron Website Help menuAbout the Software HelpAV Controls panel Device SettingsInput/Output Tab Input/Output tabImage Settings panel Input Presets panelAnalog Video tab Input format panel Audio tabAuto-input Switching panel Factory resetGeneral tab Audio Information section Signal Information sectionDevice Information panel General Information sectionTo assign Edid to all inputs Edid MinderAssign Edid To assign Edid to selected inputsEdid filters Import EdidSave output Edid Set favorite EdidReference Information Updating Firmware with Firmware LoaderDownloading Extron Firmware Loader Navigating to Firmware Loader Installing Firmware LoaderDownloading Firmware from the Extron Website Downloading FirmwareAdd Device... Dialog Box Installing Firmware with Firmware LoaderMounting Template for 2-gang Mud Rings Mounting TemplateExtron Warranty

XTP T UWP 202 specifications

The Extron XTP T UWP 202 is a state-of-the-art, two-gang wallplate transmitter designed for seamless integration into professional AV systems. As part of the XTP system by Extron, it leverages advanced technologies to ensure high-quality signal distribution over long distances, supporting both digital and analog video formats.

One of the standout features of the XTP T UWP 202 is its ability to transmit HDMI, along with audio and control signals, through a single CATx cable. This capability significantly simplifies installation and reduces cable clutter, making it an ideal choice for modern classrooms, conference rooms, and other professional environments. The wallplate connects directly to the XTP CrossPoint matrix switchers, allowing users to take advantage of centralized signal management.

The XTP T UWP 202 supports resolutions up to 4K@60Hz, covering a broad range of applications that require high-definition video output. The device is also equipped with EDID (Extended Display Identification Data) management, which guarantees optimal signal delivery by enabling automatic communication with the receiving display.

Another important aspect of the XTP T UWP 202 is its integrative capabilities. The wallplate includes a USB input for easy access to data sources, enhancing the overall connectivity of the AV system. Additionally, it supports Control Network, allowing integration with various control systems to manage connected devices effortlessly.

The design of the XTP T UWP 202 is user-friendly, featuring an intuitive layout that ensures ease of use for operators. The robust construction and sleek aesthetic allow it to blend seamlessly into any wall, while the included customizable labeling options help identify input sources clearly.

Moreover, the XTP T UWP 202 is equipped with anti-jitter technology, which helps to maintain signal integrity and reduces the chances of video artifacts, ensuring a reliable performance.

In summary, the Extron XTP T UWP 202 combines advanced transmission technology with high-definition video support and integrative features, making it a vital component for any professional AV installation. Its user-friendly design, combined with robust functionality, positions it as an excellent choice for users looking to optimize their AV experience.