Extron electronic XTP T UWP 202 manual Installing Firmware with Firmware Loader

Page 45

Installing Firmware with Firmware Loader

Use the Firmware Loader utility to upload firmware to the transmitter when connected directly to the device.

1.Connect the host device to the front panel USB port.

2.Open Firmware Loader and establish a connection between the computer and the device. The Add Device... dialog box opens.

Figure 36. Add Device... Dialog Box

3.From the Device Name drop-down list, select XTP T UWP 202.

4.From the Connection Method drop-down list, select the method of connection.

5.Depending on the connection method, additional options appear. Make the appropriate selections for the current connection method.

6.Click the Connect button.

7.Click the Browse button in the New File Firmware (Optional) section. The Open dialog box opens.

8.In the Open dialog box, navigate to the new firmware file, which has an .S19 extension, and select it.

ATTENTION: Valid firmware files must have the file extension .S19. A file with any other extension is not a firmware upgrade for this device and could cause the device to stop functioning.

9.Click the Open button. The Browse dialog box closes.

10.Click the Add button. The Add Device... dialog box closes and the device and firmware are listed in the Firmware Loader main window.

11.Click the Begin button to start the upload process.

12.Close Firmware Loader when the Remaining Time field shows 00.00.00, the Progress column is 100%, and the Status field is completed.

XTP T UWP 202 Wallplate Transmitter • Reference Information 39

Page 44 Page 46
Image 45
Page 44 Page 46
Contents XTP T UWP Safety Instructions Registered Trademarks FCC Class a NoticeSoftware Commands Specifications AvailabilityConventions Used in this Guide NotificationsContents XTP T UWP 202 Wallplate Transmitter Contents Introduction About this GuideAbout the XTP T UWP Typical Point-to-Point Application Diagram LAN Model Shown Key FeaturesXTP T UWP 202 Wallplate Transmitter Introduction Installation Overview Installation OperationCutting an Opening in the Mounting Surface Installing the Metal Junction Box or Mud RingInstalling the Mud Ring with Backing Clips Installing the Mud RingRear and Side Panel Connectors Installing a UL Listed Metal Junction BoxXTP output connector RS-232 and IR Over XTP connector RS-232 IR XTP T UWP Mounting the XTP T UWPWiring a TRS Connector for Audio Front Panel ConnectorsHdmi Connection Making ConnectionsSelected Hdmi Embedded Analog Audio Audio Sent Over XTP Audio PresentTP Cable Termination and Recommendations Supported cablesCable recommendations RS-232 and IR Over XTP Communication Wiring the RS-232 and IR Over XTP ConnectorLocal power Power ConnectionRemote power Power injectorDirect power from an XTP matrix switcher Operation IndicatorsReset Mode Summary Mode Activation Result Purpose/Notes Reset ModesFactory Reset ModeHost Device Connection SIS Configuration ControlSIS Programming Guide Host-to-Device and Device-to-Host CommunicationError Responses Using the Command and Response Tables for SIS CommandsSymbol Definitions Command and Response Tables for SIS Commands Input CommandsAudio Configuration Commands Preset Commands Picture Adjustment Commands Analog OnlyFactory defaults Edid Commands Advanced Configuration CommandsHdcp authorized device Hdmi input only Test patternInstalling the XTP System Configuration Software XTP System Configuration SoftwareConnections Using the XTP System Configuration SoftwareFile menu Top MenuDisconnect ExitConfirm Disconnect Dialog Box Update FirmwareAbout the Software Help menuHelp Extron WebsiteAV Controls panel Device SettingsInput/Output Tab Input/Output tabImage Settings panel Input Presets panelAnalog Video tab Input format panel Audio tabAuto-input Switching panel Factory resetGeneral tab Device Information panel Signal Information sectionGeneral Information section Audio Information sectionAssign Edid Edid MinderTo assign Edid to selected inputs To assign Edid to all inputsSave output Edid Import EdidSet favorite Edid Edid filtersReference Information Updating Firmware with Firmware LoaderDownloading Extron Firmware Loader Navigating to Firmware Loader Installing Firmware LoaderDownloading Firmware from the Extron Website Downloading FirmwareAdd Device... Dialog Box Installing Firmware with Firmware LoaderMounting Template for 2-gang Mud Rings Mounting TemplateExtron Warranty

XTP T UWP 202 specifications

The Extron XTP T UWP 202 is a state-of-the-art, two-gang wallplate transmitter designed for seamless integration into professional AV systems. As part of the XTP system by Extron, it leverages advanced technologies to ensure high-quality signal distribution over long distances, supporting both digital and analog video formats.

One of the standout features of the XTP T UWP 202 is its ability to transmit HDMI, along with audio and control signals, through a single CATx cable. This capability significantly simplifies installation and reduces cable clutter, making it an ideal choice for modern classrooms, conference rooms, and other professional environments. The wallplate connects directly to the XTP CrossPoint matrix switchers, allowing users to take advantage of centralized signal management.

The XTP T UWP 202 supports resolutions up to 4K@60Hz, covering a broad range of applications that require high-definition video output. The device is also equipped with EDID (Extended Display Identification Data) management, which guarantees optimal signal delivery by enabling automatic communication with the receiving display.

Another important aspect of the XTP T UWP 202 is its integrative capabilities. The wallplate includes a USB input for easy access to data sources, enhancing the overall connectivity of the AV system. Additionally, it supports Control Network, allowing integration with various control systems to manage connected devices effortlessly.

The design of the XTP T UWP 202 is user-friendly, featuring an intuitive layout that ensures ease of use for operators. The robust construction and sleek aesthetic allow it to blend seamlessly into any wall, while the included customizable labeling options help identify input sources clearly.

Moreover, the XTP T UWP 202 is equipped with anti-jitter technology, which helps to maintain signal integrity and reduces the chances of video artifacts, ensuring a reliable performance.

In summary, the Extron XTP T UWP 202 combines advanced transmission technology with high-definition video support and integrative features, making it a vital component for any professional AV installation. Its user-friendly design, combined with robust functionality, positions it as an excellent choice for users looking to optimize their AV experience.
Top Page Image Contents