Extron electronic SVS 100 manual Genlock controls and indicators, Picture controls and indicators

Page 23

Genlock controls and indicators

A genlock (black burst generator) device can be connected to the SVS 100 to synchronize it with other system components for seamless vertical interval switching between sources. See Genlock and Vertical Interval Switching in the previous chapter.

6

Burst lock LED — This LED indicates that the SVS 100 switcher is genlocked to the external black burst sync signal.

7

8

Horizontal Phase button and LED — This button enables the horizontal phase adjustment. The horizontal phase value is changed infrequently; to prevent inadvertent changes to the value, the user must press and hold down the Horizontal Phase button for 2 seconds before the horizontal phase adjustment is enabled. When enabled, the Horizontal Phase LED lights and the LCD displays the Horizontal Phase menu. The horizontal phase can be increased or decreased from 0 to 255 by rotating the encoder knob while observing the output and the LCD setting.

Sub Phase button and LED — This button enables the sub phase adjustment. The sub phase value is changed infrequently; to prevent inadvertent changes to the value, the user must press and hold the Sub Phase button down for 2 seconds before the sub phase adjustment is enabled. When enabled, the Sub Phase LED lights and the LCD displays the Sub Phase menu. The sub phase can be increased or decreased from 0 to 255 by rotating the encoder knob while observing the output and the LCD setting.

HPHASE 024

SC PHASE 024

Picture controls and indicators

9Color button and LED — This button enables the adjustment for color intensity. When the button is pressed, the Color LED lights and the color adjustment screen is displayed on the LCD. The color is adjusted by rotating the encoder knob while observing the output and the LCD setting. The color can be increased or decreased from 0 to 100 (default is 80).

10Tint button and LED — This button enables the tint adjustment. When this button is pressed, the Tint LED lights and the tint adjustment screen is displayed on the LCD. The tint is adjusted by rotating the encoder knob while observing the output and the LCD setting. The tint can be increased or decreased from 0 to 32 (default is 16).

11Brightness button and LED — This button enables the brightness, or light intensity, adjustment. When the button is pressed, the Brightness LED lights and the brightness adjustment screen is displayed on the LCD. The brightness is adjusted

COLOR 024

TINT 024

BRIGHT 024

SVS 100 Operation

3-5

Page 22 Page 24
Image 23
Page 22 Page 24
Contents SVS Seamless Video SwitcherSicherheitsanleitungen Deutsch PrecautionsSafety Instructions English Consignes de Sécurité FrançaisRack or Table/Wall Mounting Connecting the SVSQuick Start SVS Picture Controls InputEffects GenlockTable of Contents Table of Contents, cont’d Introduction OneSVS 100 Introduction IntroductionAbout the SVS Four Ntsc or PAL video inputs SVS 100 FeaturesIntroduction, cont’d Two InstallationTable or wall mounting InstallationSVS 100 Installation Mounting the SVSVideo input and output connections Power connectionCabling and Rear Panel Views Rack mountingAudio input and output connections Installation, cont’dRS-232/RS-422 connection Genlock and Vertical Interval SwitchingGenlock connections Genlock setup Superimposed waveforms Oscilloscope displaysVectorscope screen during horizontal phase adjustment Operation ThreeSVS 100 Operation Front Panel Controls and IndicatorsInput selection controls and indicators OperationExamples of switching effects Effects controls and indicatorsOperation, cont’d Picture controls and indicators Genlock controls and indicatorsEncoder knob Audio buttonAdvanced Menus Executive ModeSystem Reset Demo modeInput video type Audio switching methodVCR mode Optimizing the Video and Audio Inputs Chroma settingOperation, cont’d Windows-based Control Program FourSVS 100 Windows-based Control Program Installing the Windows-based Control SoftwareUsing the Software Windows-based Control ProgramHelp Windows-based Control Program, cont’d Serial Communication FiveSVS 100 Serial Communication Remote Control Port RS-232/RS-422Serial Communication Host-to-SVS 100 CommunicationUsing the command/response table Serial Communication, cont’d Audio Switch Mode SVS 100 Communication Example responses to commandsReference Information AAppendixSVS 100 Appendix Saving and Recalling Input Configuration PresetsReference Information Special ApplicationsRemoving the top cover Configuring the SVS 100 for RS-422Replacing the top cover Relocating the ribbon cable and setting the jumperSVS 100 Appendix Video input and loopout Specifications SVSGeneral SVS 100 Appendix FCC Class a Notice Extron’s Warranty Extron Electronics. All rights reserved
Related manuals
Manual 2 pages 10.59 Kb
Top Page Image Contents