Operation and Configuration, cont’d
IR 701 infrared remote control
The IR 701, shown at right, replicates all of the front panel controls except the Menu and Next buttons. Unless executive mode is enabled, adjustments can be made from the IR 701, but you must use the System 7’s front panel or the
Control Functions |
| Audio | |
Display | Display |
| Mute |
Power | Mute |
| |
| Mode |
| Volume |
| Input Selection |
| |
1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 |
9 | 0 |
| ENTER |
The topmost part of the IR 701 includes the control functions (Display Power, Mute, Mode) and the master volume control (as ^ and ^ buttons). The middle portion of the IR 701 features the input selection buttons, Room 1, Room 2, and centering/shift buttons. The bottom part contains the adjustment controls for color, tint, brightness, contrast, and detail adjustments. The
Room 1
Room 2
COLOR
SHIFT
Image Adjustments
adjustment functions will be disabled if executive mode is on.
Selecting an input
TINTBRIGHT
CONTDETAIL
IR 701
System Remote
To use the IR 701 to select an input, press the input number, then press the Enter key. For example, if a switcher is slaved to the System 7 and you want to select input 15, press 1, press 5, then press Enter. The System 7 will switch to input 15.
If you select an input that doesn’t exist, such as input 8 when a slave switcher is not connected, the switcher will ignore the command.