Information Menu | Extron electronic 4LQXI, 4LDXI specs

Chapter 3 • Using the System 4xi Front Panel

8. Information Menu

Use

to get this menu, and then press to select it.

Menu 8 allows the internal system information to be displayed on the LCD screen, eliminating the need to open the System 4xi cover to see the switch settings. The Information Menu is for display only; no changes can be made from here.

Press to select this menu set.

The five submenus are shown in the example to the left.

Press or to step through and display the information choices.

The diagram to the left shows some examples of what the settings could be.

Press or any input button at any time to exit.

Press to go to Menu #0 and then to go back to the Default Menu.

9. Slave Switcher Input Selection

If the System 4xi is not set up for a Slave input, this menu will not appear.

Because the System 4xi has four input buttons, if it uses a slave switcher, Menu 9 is used to select a Slave input from the Front Panel. Use the or buttons to select from Input 4 through the highest input number available. (e.g. If a System 8 PLUS switcher is used as a slave, the input channels available in Menu 9 will be 4 through 11.)

When the input is selected, its video format is also displayed.

Press to select the displayed channel.

Press to go to Menu #0 and then to go back to the Default Menu.

_______ CHL represents the input channel number (CHL04). In menus 1 and 2, VID

(VID04) and AUD (AUD04) are used because in those menus video and audio are handled separately.

Picture Controls (line doubler/line quadrupler converter)

The number of Picture Controls depends upon

Default Screen ->VID 01 RGBS depends upon video

the System 4xi model. (See Figure 3-2.) Each

->AUD 01 +00dB

Displayed information

type, audio level and

breakaway setting.

Picture Control button will display its current

setting. From this display, adjustments

Not on System 4C

can be made and saved.

Active

only with VID

HORIZ. SHIFT

or YC

type input.

_______ There are three ways to exit a display at

Press H SHIFT to Exit

any time, without saving new settings.

CONTRAST ADJ

1. Press the same Picture Control

only

Press CONT to Exit

button.

/4LQ

COLOR ADJ

2. Press any input button (1 thru 4).

Press COLOR to Exit

4LD

3. Press

to go to Menu #0 and

TINT ADJ

System

then

to go to the Default screen.

Press TINT to Exit

DETAIL ADJ

Level 1 OF 4

Press DETAIL to Exit

Change Setting

_______ Picture Controls for CONT, COLOR,

and TINT are not available for RGBLD/ RGBLQ inputs.

Accept/Save Setting

	Pressing an Input Button
Exit to Menu 0	at any time will Exit to
Exit to Menu 0	Default Menu.

Figure 3-6. System 4xi Picture Controls Display Menu Flowchart

Extron • System 4xi Switcher Series • User’s Manual

3-10