Chapter 5 • Using Windows® Control Software
Extron System Switcher Control Software
This chapter is dedicated to using Extron’s “Windows Control Program for System Switchers via
1. Connect the PC’s Comm port to the
2. Power up the System 4xi and the PC and start Windows.
_______ The floppy disk has
instructions printed on the label. The software can be run from the floppy drive, or loaded onto the PC’s hard drive.
3.Install the software from the 3.5” floppy disk onto the hard disk like any other Windows application. (Run Setup.exe from
the floppy disk.)
_______ Although this
software was designed to control any System 4xi switcher, its operation will be restricted to the features and configuration of your unit.
System 4
PC with Windows®
Operating System
Figure 5-1. Connect the PC to the System 4xi.
SYSTEM 4/8/10+
SYSTEM SWITCHER Control Pgm
4.To run the System Switcher Control program,
Figure 5-2. System Switcher Control Program icon
___________
SYSTEM
SWITCHER
Help
5.After you have selected the Comm Port, the software looks for the
System 4xi, “reads” its configuration, and then displays that information in a window called “Extron’s System Switcher Control program”. (see Figures
Extron • System 4xi Switcher Series • User’s Manual |