COMMAND LINE INTERFACE
switchport acceptable-frame-types
Use this command to configure the acceptable frame types for a port. Use the no form to restore the default.
Syntax
switchport
•all - The port passes all frames, tagged or untagged.
•tagged - The port only passes tagged frames.
Default Setting
All frame types
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
When set to receive all frame types, any received frames that are untagged are assigned to the default VLAN.
Example
The following example shows how to restrict the traffic passed on port 1 to tagged frames:
Console(config)#interface ethernet 1/1
Related Commands
switchport mode
