SMC Networks TigerSwitch 100 manual System Management Commands, Command Function Mode

SYSTEM MANAGEMENT COMMANDS

System Management Commands

These commands are used to control system logs, passwords, user name, browser configuration options, and display or configure a variety of other system information.

Command	Function	Mode	Page
Device Description Command
hostname	Specifies or modifies the host name for the	GC	3-27
	device
User Access Commands
username	Sets user name authentication at login	GC	3-27
enable password	Sets a password to control access to various	GC	3-29
	privilege levels
Jumbo Frame Command
jumbo frame	Allows jumbo frames to pass through the	GC	3-30
	switch
Web Server Commands
ip http port	Specifies the port to be used by the Web	GC	3-31
	browser interface
ip http server	Allows the switch to be monitored or	GC	3-31
	configured from a browser
ip http	Enables the HTTPS server on the switch	GC	3-32
secure-server
ip http secure-port	Specifies the UDP port number used for	GC	3-33
	HTTPS connection to the switch’s Web
	interface
Secure Shell Commands
ip ssh server	Enables the SSH server on the switch	GC	3-35
ip ssh	Specifies the authentication timeout for the	GC	3-34
	SSH server and the number of retries allowed
	by a client
disconnect ssh	Terminates an SSH connection	PE	3-36

3-25