SMC Networks TigerSwitch 100 manual Vlan database, 122

COMMAND LINE INTERFACE

Command	Function	Mode	Page
Display VLAN Information
show vlan	Shows VLAN information	NE,	3-131
		PE
show interfaces status	Displays status for the specified VLAN	NE,	3-95
vlan	interface	PE
show interfaces	Displays the administrative and	NE,	3-98
switchport	operational status of an interface	PE

vlan database

Use this command to enter VLAN database mode. All commands in this mode will take effect immediately.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•Use the VLAN database command mode to add, change, and delete VLANs. After finishing configuration changes, you can display the VLAN settings by entering the show vlan command.

•Use the interface vlan command mode to define the port membership mode and add or remove ports from a VLAN. The results of these commands are written to the running-configuration file, and you can display this file by entering the show running-configcommand.

Example

Console(config)#vlan database

Console(config-vlan)#

Related Commands

show vlan (3-131)

3-122