CONFIGURING THE SWITCH
Web – Click IGMP, Multicast Router Port Information. Select the required VLAN ID from the
CLI – This example shows that Port 11 has been statically configured as a port attached to a multicast router.
Console#show | ip igmp snooping mrouter vlan 1 | ||||
VLAN | M'cast | Router | Port | Type |
|
| |||||
1 |
| Eth | 1/11 | Static |
|
|
|
|
|
|
|
Specifying Interfaces Attached to a Multicast Router
Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the IGMP querier is a known multicast router/switch connected over the network to an interface (port or trunk) on your switch, you can manually configure that interface to join all the current multicast groups. This can ensure that multicast traffic is passed to all the appropriate interfaces within the switch.
Command Attributes
•Interface – Activates the Port or Trunk scroll down list.
