SMC Networks TigerSwitch 100 manual Ip ssh

COMMAND LINE INTERFACE

Default Setting

443

Command Mode

Global Configuration

Command Usage

•You cannot configure the HTTP and HTTPS servers to use the same port.

•If you change the HTTPS port number, clients attempting to connect to the HTTPS server must specify the port number in the URL, in this format:

https://device:port_number

Example

Console(config)#ip http secure-port 1000

Console(config)#

Related Commands

ip http secure-server (3-32)

ip ssh

Use this command to configure authentication control parameters for the Secure Shell (SSH) server on this switch. Use the no form to restore the default settings.

Syntax

ip ssh {[timeout seconds] [authentication-retries count]} no ip ssh {[timeout] [authentication-retries]}

•seconds – The timeout for client response during SSH negotiation. (Range: 1-120)

•count – The number of authentication attempts permitted after which the interface is reset. (Range: 1-5)

3-34