IGMP SNOOPING COMMANDS
Command Usage
Member types displayed include IGMP or USER, depending on selected options.
Example
The following shows the multicast entries learned through IGMP snooping for VLAN 1:
Console#show | |||
VLAN M'cast | IP addr. Member ports | Type | |
1 | 224.1.2.3 | Eth1/11 | IGMP |
Console# |
|
|
|
|
|
|
|
ip igmp snooping querier
Use this command to enable the switch as an IGMP snooping querier. Use the no form to disable it.
Syntax
ip igmp snooping querier no ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is responsible for asking hosts if they want to receive multicast traffic.
Example
Console(config)#ip igmp snooping querier
Console(config)#
