LINE COMMANDS

Command Mode

Line Configuration

Command Usage

The databits command can be used to mask the high bit on input from devices that generate 7 data bits with parity. If parity is being generated, specify 7 data bits per character. If no parity is required, specify 8 data bits per character.

Example

To specify 7 data bits, enter this command:

Console(config-line)#databits 7

Console(config-line)#

Related Commands

parity (3-81)

parity

Use this command to define generation of a parity bit. Use the no form to restore the default setting.

Syntax

parity {none even odd} no parity

none - No parity

even - Even parity

odd - Odd parity

Default Setting

No parity

Command Mode

Line Configuration

3-81

Page 225
Image 225
SMC Networks TigerSwitch 100 manual Syntax Parity none even odd no parity