SMC Networks TigerSwitch 100 manual 155

CONFIGURING THE SWITCH

•Traffic Class – Output queue buffer. (Range: 0 - 3, where 3 is the highest CoS priority queue)

Web – Click Priority, Traffic Classes. Assign priorities to the output queues, then click Apply.

CLI – The following example shows how to map CoS values 0, 1 and 2 to CoS priority queue 0, value 3 to CoS priority queue 1, values 4 and 5 to CoS priority queue 2, and values 6 and 7 to CoS priority queue 3.

Console(config)#interface ethernet 1/1				3-85
Console(config)#queue cos-map 0 0 1 2				3-153
Console(config)#queue cos-map 1 3
Console(config)#queue cos-map 2 4 5
Console(config)#queue cos-map 3 6 7
Console(config)#exit
Console#show queue cos-map ethernet 1/1				3-155
Information of Eth 1/1
Queue ID	Traffic class
--------	-------------
0	0	1	2
1	3
2	4	5
3	6	7
Console#

2-80